Coverage across West Yorkshire
Wherever you are in West Yorkshire, we need the same three things to get started on break-out escape route doors: a short description of the door, a few photos if you have them, and the address. From there we agree the price in writing and book a specialist engineer working under our management. Every town listed below has a page of its own, 26 in total.
Towns listed in West Yorkshire: Leeds, Bradford, Huddersfield, Wakefield, Halifax, Dewsbury, Morley, Keighley, Castleford, Pontefract, Batley, Yeadon, Brighouse, Shipley, Cleckheaton, Pudsey, Ossett, Normanton, Guiseley, Rothwell, Liversedge, Horsforth, South Elmsall, Mirfield, Heckmondwike, Bingley.
What to think about for break-out escape route doors in West Yorkshire
- Check the swing zone outside the entrance. Planters, cycle stands, bins and A-boards that are harmless beside a normal door can stop a break-out leaf opening fully, so plan to keep that area clear.
- Work on a busy entrance in West Yorkshire is often best done early in the morning, in the evening or over a weekend. Any out-of-hours working is agreed and priced in the written quote rather than added later.
- Older entrances on high streets in West Yorkshire may have uneven thresholds or sloping pavements. Break-out leaves need a level floor and solid fixing for the bottom pivots, and correcting that can add a day to the work.
- Supermarkets and large stores in West Yorkshire see trolleys, pallets and cleaning machines through the entrance. Those knocks can stiffen or loosen break-out fittings, so set service intervals with that traffic in mind.
- Entrances facing the prevailing wind can have break-out leaves pushed by strong gusts. The break-out fittings and the door's wind settings are chosen at survey to suit how exposed the entrance is.
Break-out escape route doors in West Yorkshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Break-out sliding door set for an escape route | from £7,995 | installed, ex VAT; typically up to £16,995 |
| Converting an existing sliding door to break-out | Priced on survey | depends on the frame, leaves and operator |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
Standards and rules in England
In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits. Break-out sliding doors are used where an entrance also forms part of an escape route, as the fire strategy allows. Whether a break-out door is suitable is decided by the fire strategy for the building and the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for break-out escape route doors in West Yorkshire, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Send us the opening size and what your fire strategy asks for, and we will arrange a free survey in West Yorkshire and a fixed, itemised quote for a break-out entrance.
Break-out escape route doors in West Yorkshire: questions
Do you install break-out sliding doors in West Yorkshire?
Yes. We arrange surveys and installations in West Yorkshire through specialist automatic door engineers working under our management. We supply the complete entrance, set it up to the fire strategy you give us, test it in every mode and hand over the records. The survey is free and the quote is fixed.
Can you give me a price for break-out escape route doors in West Yorkshire?
Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in West Yorkshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long will our entrance in West Yorkshire be out of use?
Usually one to three days on site, depending on the size of the opening and any building or electrical work. Where the entrance is the only way in, we plan the sequence so a temporary door or a partly open entrance can be kept, and agree any out-of-hours working in the quote.
Can you look after break-out doors in West Yorkshire once they are fitted?
Yes. We can arrange planned servicing, with the break-out fittings, alarm release and power failure behaviour tested at each visit and a written record left on site. Each visit is priced in writing before anyone attends, and the interval is set by how hard the door works.
What power supply is needed for break-out escape route doors in West Yorkshire?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
What happens once the installation in West Yorkshire is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Which building regulations apply to a new automatic entrance in West Yorkshire?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.