Covering Chester and nearby
For automatic swing doors, coverage around Chester is set by postcode and includes the CH1 and CH2 postcode districts, as well as nearby addresses in Cheshire. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
Around Chester there is usually a mix of retail parks, business parks and town-centre shops, each with different door needs. A retail park unit may need a wide bi-parting door for trolleys, while a town-centre shop often has a narrow frontage better suited to a single slider or a folding door.
Nearby towns we also list for automatic swing doors (straight-line distance): Ellesmere Port (6.1 miles), Connah's Quay (6.3 miles), Buckley (8.1 miles), Mold (10.5 miles), Flint (10.6 miles), Wrexham (10.8 miles).
What to think about for automatic swing doors in Chester
- External swing doors facing the wind need stronger operators and careful set-up. On exposed sites across Cheshire, consider whether a canopy or a sliding door would work better.
- Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.
- Toilet and changing room doors used by disabled people may suit a low-energy operator instead. The survey compares the options based on how busy the door is and who uses it.
- Hospital and care home corridors in Chester need doors that open early enough for beds and trolleys. Radar sensors set to the right range, or a push pad placed before the door, keep traffic moving.
- Office buildings in Chester with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
Automatic swing doors in Chester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Describe what you need. Whether the job is automatic swing doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Chester.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Book a free survey in Chester, and an engineer will check your doors, hinges and fire labels and recommend the right operator.
Automatic swing doors in Chester: questions
How quickly can a swing operator be fitted in Chester?
Operators for existing doors are typically 2 to 4 weeks from order. On site, a single door usually takes half a day to a day, and a pair about a day. We can plan work for evenings, weekends or holidays where the building is busy, with any extra cost shown in the quote.
Can you give me a price for automatic swing doors in Chester?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Chester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you service swing doors in Chester after fitting?
Yes. We can arrange planned servicing, with each visit priced in writing before an engineer attends. A trained engineer should check the safety functions at least once a year, and busy corridors, schools and hospitals usually need more frequent visits. Staff should also carry out simple daily checks.
What paperwork do we get for automated doors in Chester?
You receive the test record, a site-specific risk assessment, user instructions and the conformity paperwork for each door. When an existing manual door is motorised, whoever does it may take on the manufacturer's duties for the finished door, so the Declaration of Conformity and instructions are handed over at the end of the job.
Can automatic doors be fitted to a listed building in Chester?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
What happens to the old door when a new one is fitted in Chester?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Do businesses in Chester have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.