Covering Connah's Quay and nearby
We cover the whole of the CH5 postcode district, along with nearby towns in Clwyd. You book each visit for automatic swing doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Small offices, community centres and village halls around Connah's Quay tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for automatic swing doors (straight-line distance): Buckley (3.1 miles), Flint (4.7 miles), Mold (4.9 miles), Chester (6.3 miles), Ellesmere Port (7.8 miles), Heswall (8.8 miles).
What to think about for automatic swing doors in Connah's Quay
- Check the hinges first. Older doors in Connah's Quay often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
- Hospital and care home corridors in Connah's Quay need doors that open early enough for beds and trolleys. Radar sensors set to the right range, or a push pad placed before the door, keep traffic moving.
- Office buildings in Connah's Quay with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
- Electric locks must be coordinated with the operator, so the lock releases before the arm moves. Tell us about existing locks, card readers and intercoms at the survey.
- Toilet and changing room doors used by disabled people may suit a low-energy operator instead. The survey compares the options based on how busy the door is and who uses it.
Automatic swing doors in Connah's Quay: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Wales
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic swing doors in Connah's Quay, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Tell us how many doors you have in Connah's Quay, and whether they are single or double, and we will arrange a free survey.
Automatic swing doors in Connah's Quay: questions
Can our existing doors in Connah's Quay be automated?
Usually, if the doors, hinges and frames are in good condition. The survey checks the door weight, the hinges, what the operator will fix to and what sits in the swing path. Where a door is too worn, we will say so and quote a new doorset with the operator fitted instead.
What price range should I expect for automatic swing doors in Connah's Quay?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Connah's Quay confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit low-energy operators in Connah's Quay as well?
Yes. Where a door is quieter and used mainly by people who need help opening it, a low-energy operator may be the better choice, as long as a risk assessment shows it is suitable. We compare full-energy and low-energy at the survey and explain the difference in the quote.
How quickly can a swing operator be fitted in Connah's Quay?
Operators for existing doors are typically 2 to 4 weeks from order. On site, a single door usually takes half a day to a day, and a pair about a day. We can plan work for evenings, weekends or holidays where the building is busy, with any extra cost shown in the quote.
How much disruption should we expect while the work is done in Connah's Quay?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
What happens once the installation in Connah's Quay is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do businesses in Connah's Quay have to fit automatic doors?
There is no blanket requirement. Service providers and employers must make reasonable adjustments for disabled people under the Equality Act 2010, and Welsh building regulations guidance expects entrances that are easy to open. An automatic door is a common way to meet both.