Covering Chester and nearby
From shops and surgeries to schools, care homes and private houses, any building in the CH1 and CH2 postcode districts can be covered for frameless glass automatic doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Care homes and supported living schemes are spread across Chester and the surrounding area, and their doors have to balance easy access with resident safety. Slow, gentle operation, hold-open devices linked to the fire alarm and controlled exits are typical requirements.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Ellesmere Port (6.1 miles), Connah's Quay (6.3 miles), Buckley (8.1 miles), Mold (10.5 miles), Flint (10.6 miles), Wrexham (10.8 miles).
What to think about for frameless glass automatic doors in Chester
- Glass partitions in office buildings across Cheshire are often supplied by a fit-out contractor. Share their drawings with us so the door glass, gaps and finishes match the rest of the screens.
- Clear glass is easy to walk into. Plan manifestation at the outset, whether frosted bands or a pattern based on your logo, rather than adding stickers after the door is fitted.
- Floor guides need a sound floor. Where the entrance has stone, tiles or polished concrete, agree whether a channel will be cut or a small surface guide fixed, and who makes good the finish.
- Every edge and fitting on a frameless door is visible. Choose a top rail and clamp finish, such as satin stainless or black, that suits the rest of the ironmongery in the building.
- Listed interiors and heritage buildings in Chester sometimes favour frameless glass because it hides less of the original fabric. Consent may still be needed, so check with the planning authority early.
Frameless glass automatic doors in Chester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Chester.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
For an all-glass entrance in Chester that is measured, fitted and set up properly, contact us and book your free site survey.
Frameless glass automatic doors in Chester: questions
Do we need building approval for a frameless door in Chester?
Replacing a door like for like does not always need approval, but new entrances and wider building work can. Building regulations guidance on access to buildings applies to new buildings and to building work on existing ones, and the details differ in each UK nation. Your local building control or building standards service can confirm what applies.
How are prices worked out for frameless glass automatic doors in Chester?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Chester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does fitting take in Chester?
Most frameless automatic doors take a day on site once the glass has been made, which is typically 4 to 8 weeks from order. Work in occupied offices can be planned for quieter times, early mornings or weekends, and any extra cost for out-of-hours work is shown separately in the quote.
Can a frameless door in Chester be connected to our access control?
Yes. The operator can be linked to card readers, fob readers, keypads, intercoms or a timer, so the door opens freely in working hours and only for authorised people at other times. Tell us what you already have at the survey and the quote will set out the interface work.
What does the free site survey in Chester involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for frameless glass automatic doors, with drawings where the door type needs them.
What power supply is needed for frameless glass automatic doors in Chester?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Which building regulations apply to a new automatic entrance in Chester?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.