Covering Telford and nearby
Our coverage of Telford takes in the TF2, TF3, TF4, TF5, TF7 and TF8 postcode districts and the neighbouring parts of Shropshire. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about automatic internal doors and we will confirm the arrangements and the price in writing.
Mixed-use buildings in Telford, with shops at street level and offices or flats above, often share an entrance or a fire route. Doors in those settings have to suit several users at once, and the managing agent or landlord is usually involved in approving work.
Nearby towns we also list for automatic internal doors (straight-line distance): Wellington (3.3 miles), Shrewsbury (12.9 miles), Wolverhampton (15.1 miles), Wednesfield (16.2 miles), Stafford (16.5 miles), Sedgley (16.6 miles).
What to think about for automatic internal doors in Telford
- Lightweight stud partitions may not carry an operator without extra support. The survey checks what the wall is made of and what reinforcement is needed.
- Schools and colleges in Telford often prefer corridor work in the holidays. Book the survey early in the term before, so doors and operators can be ordered and delivered in time.
- Offices in Telford with open-plan floors often have corridor fire doors that are held open by wedges. A proper hold-open device or operator removes the wedge and keeps the door working as a fire door.
- Hospitals in Telford usually have estates teams with their own standards for door widths, controls and fire alarm interfaces. Share those early so the quote matches them.
- Noise matters on wards and in bedrooms. Ask for night settings or quieter operators on doors near where people sleep, and check how loud any electric locks are when they release.
Automatic internal doors in Telford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic internal doors in Telford, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Send us a list of the doors and how they are used, and we will plan automatic internal doors for your building in Telford.
Automatic internal doors in Telford: questions
How disruptive is the work in an occupied building in Telford?
Usually less than people expect. Most swing operators take half a day to a day per door, and sliding doors a little longer. We plan the order of work to keep routes open, control dust, and agree any out-of-hours working in the quote.
How are prices worked out for automatic internal doors in Telford?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Telford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you supply internal sliding doors as well as swing operators in Telford?
Yes. Where there is wall space beside the opening, a sliding door keeps the corridor clear and gives a wide opening, which suits wards. Where there is not, or the door is a fire door, a swing operator is usually the better fit. The survey compares both.
Can you automate the corridor doors in our care home in Telford?
Yes. We survey each door, including its fire rating, hinges, frame and power, and quote a fixed price. Doors can be set to open gently and slowly, with extra safety sensors where residents are frail. Work is planned around your care routines and agreed with the home manager.
What should I send before the survey in Telford?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for automatic internal doors together more easily.
Can automatic doors be fitted to a listed building in Telford?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Which building regulations apply to a new automatic entrance in Telford?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.