Covering Telford and nearby
Coverage for fire door hold-open devices runs across the TF2, TF3, TF4, TF5, TF7 and TF8 postcode districts and out into the surrounding parts of Shropshire. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.
City-centre entrances tend to be the busiest doors of all: shopping centres, stations, hospitals and office towers can see thousands of passes a day. In Telford, that usually means heavy-duty operators, careful sensor set-up and servicing at intervals matched to the traffic.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Wellington (3.3 miles), Shrewsbury (12.9 miles), Wolverhampton (15.1 miles), Wednesfield (16.2 miles), Stafford (16.5 miles), Sedgley (16.6 miles).
What to think about for fire door hold-open devices in Telford
- If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
- Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.
- Residential blocks often have communal corridor doors that residents prop open. Hold-open devices give the same convenience while letting the doors close when the alarm sounds.
- Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.
- Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
Fire door hold-open devices in Telford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
How it works
- Describe what you need. Whether the job is fire door hold-open devices for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Telford.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Tell us about the fire doors that cause problems in Telford. We will survey them free of charge and explain which hold-open options your alarm can support.
Fire door hold-open devices in Telford: questions
Are battery hold-open units a good choice for older buildings in Telford?
Often they are. Radio and acoustic battery units avoid long cable runs, which helps in older or listed buildings and finished corridors. Acoustic units are only suitable where the fire risk assessment allows them and the alarm can be heard clearly at the door. Batteries need replacing at the interval the maker states.
Can you give me a price for fire door hold-open devices in Telford?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Telford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you work with the fire alarm company that maintains our system in Telford?
Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.
Do care homes in Telford use free-swing closers?
Many do. A free-swing closer lets residents open their bedroom door without pushing against a closer, and it still shuts the door when the fire alarm operates. Whether it suits each room depends on the home's fire risk assessment and evacuation strategy, which we read before recommending any device.
Do you service doors in Telford after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
How much disruption should we expect while the work is done in Telford?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Which building regulations apply to a new automatic entrance in Telford?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.