Covering Telford and nearby
If your building is in Telford, or anywhere in the TF2, TF3, TF4, TF5, TF7 and TF8 postcode districts, we can arrange accessible door operators. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
City-centre entrances tend to be the busiest doors of all: shopping centres, stations, hospitals and office towers can see thousands of passes a day. In Telford, that usually means heavy-duty operators, careful sensor set-up and servicing at intervals matched to the traffic.
Nearby towns we also list for accessible door operators (straight-line distance): Wellington (3.3 miles), Shrewsbury (12.9 miles), Wolverhampton (15.1 miles), Wednesfield (16.2 miles), Stafford (16.5 miles), Sedgley (16.6 miles).
What to think about for accessible door operators in Telford
- Doors in exposed spots around Telford can be caught by the wind. A low-energy operator has limited force, so the survey checks whether the door will open and close reliably on a gusty day.
- Offices and shared buildings in Telford often have doors used by both staff and visitors. Power assist for everyday use, with a push pad for those who need full opening, keeps the door easy for everyone.
- Check how heavy the door is to push now. If the closer is set very strong for fire or wind reasons, the operator has to be chosen to suit, and the closer may need adjusting.
- Older public buildings in Telford often have heavy timber doors on worn hinges. Fixing the hinges and the way the door hangs before the operator goes on gives a smoother, longer-lasting result.
- Think about the whole route, not just one door. A step, a heavy inner door or a tight turn after an automatic entrance can still stop a wheelchair user getting where they need to go.
Accessible door operators in Telford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,795 to £2,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing single door, with push pads | £1,795 – £2,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Telford.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Get the door at your premises in Telford opening at the press of a pad. Start with a free survey and a fixed written quote.
Accessible door operators in Telford: questions
Can the operator be serviced after installation in Telford?
Yes. We can arrange visits where the speed, force, safety settings, push pads and closer are checked and a written record is left. You agree the cost of each visit in writing beforehand, and how often we come depends on how much the door is used.
What do you charge for accessible door operators in Telford?
Our guide is £1,795 to £2,995 excluding VAT (per single door), the same guide prices we use across the UK. The free site survey in Telford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit an accessible operator to a door at our surgery in Telford?
Yes, in most cases. We check the door, hinges, frame and the wall above at a free survey, then quote a fixed price for the operator, push pads and any repairs needed first. Fitting usually takes half a day to a day per door, planned around your opening hours.
Our building in Telford is listed. Can we still have an operator?
Often, yes. Low-energy operators are compact and can sometimes be mounted on the inside face, with cabling hidden. Listed building consent may still be needed for fixings or new switches, so check with the planning authority. We can supply product details for an application.
What should I send before the survey in Telford?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for accessible door operators together more easily.
What is the lead time for accessible door operators in Telford?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Which building regulations apply to a new automatic entrance in Telford?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.