Covering Stockton-on-Tees and nearby
Addresses anywhere in the TS18, TS19 and TS20 postcode districts can book automatic door servicing through us. The engineer who attends works under our management and travels to the site. There is no branch in Stockton-on-Tees, so the price, the booking and the paperwork all come from one place.
Care homes and supported living schemes are spread across Stockton-on-Tees and the surrounding area, and their doors have to balance easy access with resident safety. Slow, gentle operation, hold-open devices linked to the fire alarm and controlled exits are typical requirements.
Nearby towns we also list for automatic door servicing (straight-line distance): Billingham (1.8 miles), Thornaby-on-Tees (2.5 miles), Middlesbrough (3.4 miles), Yarm (4.7 miles), Hartlepool (9.2 miles), Darlington (9.8 miles).
What to think about for automatic door servicing in Stockton-on-Tees
- Older doors in Stockton-on-Tees may need parts replaced more often as they age. A service history that tracks wear helps you budget for repairs or a new drive unit before a breakdown.
- Exposed entrances collect grit, leaves and rain. Weather-facing doors benefit from extra attention to the floor guide, brush strips and sensor settings at each service.
- Floors matter. Uneven, worn or newly laid floor finishes can affect floor guides and sensor detection, so mention any recent floor work before the service.
- Doors on busy high streets in Stockton-on-Tees can cycle hundreds of times a day. Heavy use wears belts, rollers and floor guides faster, so these doors usually need more frequent visits.
- If several buildings share one maintenance budget, a single contract with one price per door and one set of records is easier to manage than booking visits separately.
Automatic door servicing in Stockton-on-Tees: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Single service visit, first door on site | £145 – £245 | checks, adjustment and service record, ex VAT; homes £174 – £294 inc VAT |
| Each additional door on the same visit | £60 – £120 | ex VAT; homes £72 – £144 inc VAT |
| Service contract, one visit a year | £145 – £245 | first door, per year, visit booked in advance at a fixed price, ex VAT; homes £174 – £294 inc VAT |
| Service contract, two visits a year | £270 – £460 | first door, per year, ex VAT; additional doors at the per-visit rate above; homes £324 – £552 inc VAT |
No law sets a fixed service interval. We recommend a safety check by a trained engineer at least once a year, and more frequent visits for busy doors. Repairs found during a service are quoted before they are done.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for automatic door servicing can be planned.
- Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
- On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
- Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.
Keep your maintenance records complete. Arrange planned visits for automatic doors in Stockton-on-Tees, each one priced in advance and documented afterwards.
Automatic door servicing in Stockton-on-Tees: questions
Do you service automatic doors in Stockton-on-Tees?
Yes. Planned service visits in Stockton-on-Tees are carried out by automatic door specialists who work under our management, with us as your contracting party. They service sliding, swing, folding and revolving doors from most makers. The cost of each visit is confirmed in writing before it is booked, and you receive a service report afterwards.
How are prices worked out for automatic door servicing in Stockton-on-Tees?
Our guide starts from £145 excluding VAT (per visit, first door), the same guide price we use across the UK. For homes that is from £174 including VAT. We agree the visit price in writing before an engineer attends in Stockton-on-Tees, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Will servicing help with our insurer or landlord in Stockton-on-Tees?
Many insurers and landlords ask for evidence that automatic doors are maintained. A written service report for each door, kept in a logbook or digital folder, is the usual way to show that. If they ask for a risk assessment against BS EN 16005, a safety inspection can be added.
How often should doors in Stockton-on-Tees be serviced?
There is no fixed legal interval. We recommend a trained engineer checks the safety functions at least once a year, with the interval set by the manufacturer's instructions and how heavily the door is used. Busy entrances, such as shops and surgeries, are often serviced every six months.
Which makes of automatic door can you work on in Stockton-on-Tees?
Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.
Can visits in Stockton-on-Tees be arranged outside working hours?
Yes, where the site needs it. Early-morning, evening and weekend visits can be arranged for shops, surgeries and offices that cannot lose their entrance during the day. Any difference in price for out-of-hours attendance is agreed in writing before the visit is booked, alongside the standard visit price.
Do businesses in Stockton-on-Tees have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.