Covering Stockton-on-Tees and nearby
Homes, businesses and public buildings throughout the TS18, TS19 and TS20 postcode districts can arrange safety inspections and risk assessments with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Stockton-on-Tees for the job rather than working from premises in town.
Business parks around Stockton-on-Tees tend to have reception doors that see steady rather than heavy traffic, often with access control after hours. A swing or sliding operator linked to a card reader or intercom is a common arrangement for entrances like these.
Nearby towns we also list for safety inspections and risk assessments (straight-line distance): Billingham (1.8 miles), Thornaby-on-Tees (2.5 miles), Middlesbrough (3.4 miles), Yarm (4.7 miles), Hartlepool (9.2 miles), Darlington (9.8 miles).
What to think about for safety inspections and risk assessments in Stockton-on-Tees
- Schools and nurseries need particular care with finger traps at hinges and beside side screens, because children are more likely to put their hands into gaps.
- Doors on escape routes must let people out safely during a fire or evacuation. The inspection checks break-out, power-failure opening or manual release, as the fire strategy requires.
- Programme switches left in the wrong mode cause many incidents. The inspection checks the switch is secure, labelled and set correctly for each time of day.
- Glass leaves need safety glazing and visible markings. Faded or missing manifestation is a common finding, and one of the quickest and cheapest to put right.
- Shared entrances in office blocks and business parks in Stockton-on-Tees may serve several tenants. Agree who holds the report and who pays for upgrades before booking.
Safety inspections and risk assessments in Stockton-on-Tees: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Safety inspection and risk assessment, existing door | £125 – £250 | per door, written report, ex VAT |
| Inspection added to a service visit | reduced | quoted with the service |
| Upgrades found by the inspection | quoted separately | see safety and compliance upgrades |
The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Stockton-on-Tees and how much the site depends on the door.
- Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
- Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
- Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.
Need a risk assessment for an insurer or landlord in Stockton-on-Tees? Send us their request and we will arrange an inspection and a written report.
Safety inspections and risk assessments in Stockton-on-Tees: questions
What if a door in Stockton-on-Tees is found to be unsafe?
The engineer explains the problem before leaving and may recommend switching the door to a safer mode until it is fixed. High-priority findings are flagged at the top of the report. We can quote the repair or upgrade straight away, or you can arrange it with another competent installer.
What is the guide price for safety inspections and risk assessments in Stockton-on-Tees?
Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Stockton-on-Tees, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Our insurer in Stockton-on-Tees has asked for a risk assessment. Is this what they mean?
Most likely. Insurers usually want a documented, site-specific risk assessment of the door by a competent person, along with service records. Check their exact wording and send it to us. Our report covers the door's hazard zones, test results and recommended actions, which is what most insurers expect to see.
Do you carry out automatic door safety inspections in Stockton-on-Tees?
Yes. We organise the inspection and issue the report, and the assessment in Stockton-on-Tees is carried out by a specialist engineer under our management. Each door is assessed on site against BS EN 16005 hazard zones, its safety sensors are tested and you receive a written report with ranked findings. The inspection price is agreed in writing before the visit.
How soon can an engineer get to Stockton-on-Tees?
We do not promise response times. When you book, we give you the earliest date we can offer and confirm it once the price is agreed. If the door is unsafe in the meantime, it is usually best to switch it off or set it to a safe mode, put up a sign and keep people clear of it.
What happens during a visit in Stockton-on-Tees?
The engineer checks how the door is operating, diagnoses the fault or carries out the service, and tests the safety sensors and other functions before leaving. On a service visit that includes cleaning, adjustment and lubrication where needed. Anything that cannot be put right on the visit, or that needs parts, is explained and quoted before further work goes ahead.
Do businesses in Stockton-on-Tees have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.