Covering Stornoway and nearby
For automatic door refurbishment, coverage around Stornoway is set by postcode and includes the HS1 postcode district, as well as nearby addresses in Orkney, Shetland and the Western Isles. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
Island addresses such as Stornoway need more planning than the mainland. Photos, measurements and door details are gathered in advance, so that a survey and a later installation, or a repair visit, can each be done in as few trips as possible.
What to think about for automatic door refurbishment in Stornoway
- Office blocks and business parks in Stornoway with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
- Older shopfronts with discontinued door systems may need equivalent parts rather than exact matches. The survey identifies what is still available before anything is ordered.
- Busy retail units in Stornoway may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
- Floors around the door in Stornoway may be worn or uneven. New floor guides and thresholds sometimes need small areas of making good, which the quote lists separately.
- If the operator is close to the end of its life, refurbishing the running gear while fitting a new drive unit saves a second visit and a second set-up.
Automatic door refurbishment in Stornoway: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. For island addresses the survey is still free; travel and accommodation for the installation itself are shown as a separate line in the quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in Scotland
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Stornoway.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Bring a tired entrance in Stornoway back to life. Ask for a fixed quote for new glass, rollers, seals or a level threshold, with no obligation.
Automatic door refurbishment in Stornoway: questions
Can you refinish the frame of our door in Stornoway?
Yes. Aluminium frames can be cleaned, repaired and recoated on site to refresh their colour. Badly damaged sections may need replacing rather than refinishing. Refinishing is listed separately in the quote, so you can decide whether to include it now or leave it for a later phase.
How are prices worked out for automatic door refurbishment in Stornoway?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Stornoway confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you replace a single broken glass leaf in Stornoway?
Yes. The leaf is made safe, measured and reglazed with new safety glass, or replaced completely if its frame is damaged. New glass is typically 2 to 4 weeks from order. Once the leaf is rehung, the door is set up again and the track and floor guide are checked.
Can you refurbish a door in Stornoway that another company installed?
Yes. We refurbish doors whoever fitted them. The survey identifies the door system, and matching or equivalent rollers, guides, seals and glass are then sourced for it. If a part is no longer made, the quote explains the alternative.
What is the lead time for automatic door refurbishment in Stornoway?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
What do you need from us for parking and access in Stornoway?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Is a building warrant needed for a new automatic entrance in Stornoway?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.