Coverage across Hertfordshire
From large town centres to quiet villages, entrances across Hertfordshire vary a great deal, and the right approach to automatic door refurbishment varies with them. A surgery door used by patients with walking frames needs different settings from a supermarket entrance, so the engineer looks at the actual door first. The towns we list in this area currently number 19.
Towns listed in Hertfordshire: Watford, Hemel Hempstead, Stevenage, St Albans, Welwyn Garden City, Cheshunt, Hatfield, Bishop's Stortford, Borehamwood, Hitchin, Hoddesdon, Letchworth, Harpenden, Bushey, Hertford, Rickmansworth, Potters Bar, Berkhamsted, Ware.
What to think about for automatic door refurbishment in Hertfordshire
- Office blocks and business parks in Hertfordshire with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
- Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
- If the operator is close to the end of its life, refurbishing the running gear while fitting a new drive unit saves a second visit and a second set-up.
- High street doors in Hertfordshire often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
- Exposed entrances in Hertfordshire suffer most from worn seals and brush strips. New weatherproofing can cut draughts and noise noticeably, especially on doors facing the prevailing wind.
Automatic door refurbishment in Hertfordshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Hertfordshire and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic door refurbishment separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Cracked glass, worn rollers or draughty seals at your entrance in Hertfordshire? Book a free survey and choose the work that matters most to you.
Automatic door refurbishment in Hertfordshire: questions
Can you refurbish a door in Hertfordshire that another company installed?
Yes. We refurbish doors whoever fitted them. The survey identifies the door system, and matching or equivalent rollers, guides, seals and glass are then sourced for it. If a part is no longer made, the quote explains the alternative.
What do you charge for automatic door refurbishment in Hertfordshire?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Hertfordshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can refurbishment in Hertfordshire help with draughts and heating costs?
New seals and brush strips, and leaves that close fully, reduce draughts through a closed door. For very exposed entrances, a second set of doors forming a draught lobby may also be worth considering, and we can price both so you can compare the likely benefit.
Can you refinish the frame of our door in Hertfordshire?
Yes. Aluminium frames can be cleaned, repaired and recoated on site to refresh their colour. Badly damaged sections may need replacing rather than refinishing. Refinishing is listed separately in the quote, so you can decide whether to include it now or leave it for a later phase.
Do I need permission from a landlord or the council before work in Hertfordshire?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
What power supply is needed for automatic door refurbishment in Hertfordshire?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Which building regulations apply to a new automatic entrance in Hertfordshire?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.