Covering Crewe and nearby
We do not keep premises in Crewe. Instead, enquiries about automatic door refurbishment come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the CW1 and CW2 postcode districts on a date that suits the site.
Schools and colleges in and around Crewe often want work done in the holidays, when entrances can be taken out of use without disrupting pupils. Planning ahead for half-term or summer dates makes it easier to find a slot that suits the timetable.
Nearby towns we also list for automatic door refurbishment (straight-line distance): Nantwich (3.8 miles), Sandbach (4.6 miles), Winsford (7.3 miles), Kidsgrove (8.5 miles), Congleton (10.5 miles), Newcastle-under-Lyme (11.0 miles).
What to think about for automatic door refurbishment in Crewe
- Care settings in Crewe benefit from level thresholds and smooth-running leaves that do not snag walking frames, trolleys or wheelchair footplates as people pass through.
- Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
- Office blocks and business parks in Crewe with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
- High street doors in Crewe often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
- Glass and made-to-measure leaves are typically 2 to 4 weeks from order. Plan the work around that lead time, especially if a damaged leaf is temporarily boarded.
Automatic door refurbishment in Crewe: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Crewe.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Book a free refurbishment survey in Crewe. We will check the frame, leaves and running gear, then price each item separately on a fixed quote.
Automatic door refurbishment in Crewe: questions
Can you replace a single broken glass leaf in Crewe?
Yes. The leaf is made safe, measured and reglazed with new safety glass, or replaced completely if its frame is damaged. New glass is typically 2 to 4 weeks from order. Once the leaf is rehung, the door is set up again and the track and floor guide are checked.
How are prices worked out for automatic door refurbishment in Crewe?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Crewe confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you refurbish automatic doors in Crewe?
Yes. Refurbishment work in Crewe is planned and priced by us, then carried out by automatic door engineers and glaziers working under our management. There is no charge for the survey, and you receive a fixed quote with each item priced separately, from new glass and rollers to seals, floor guides, the threshold and frame refinishing.
Can refurbishment in Crewe help with draughts and heating costs?
New seals and brush strips, and leaves that close fully, reduce draughts through a closed door. For very exposed entrances, a second set of doors forming a draught lobby may also be worth considering, and we can price both so you can compare the likely benefit.
Can automatic doors be fitted to a listed building in Crewe?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Crewe is agreed before work starts.
Who is responsible for automatic doors on escape routes in Crewe?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.