Covering Crewe and nearby
Our coverage of Crewe takes in the CW1 and CW2 postcode districts and the neighbouring parts of Cheshire. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about safety inspections and risk assessments and we will confirm the arrangements and the price in writing.
Care homes and supported living schemes are spread across Crewe and the surrounding area, and their doors have to balance easy access with resident safety. Slow, gentle operation, hold-open devices linked to the fire alarm and controlled exits are typical requirements.
Nearby towns we also list for safety inspections and risk assessments (straight-line distance): Nantwich (3.8 miles), Sandbach (4.6 miles), Winsford (7.3 miles), Kidsgrove (8.5 miles), Congleton (10.5 miles), Newcastle-under-Lyme (11.0 miles).
What to think about for safety inspections and risk assessments in Crewe
- Shared entrances in office blocks and business parks in Crewe may serve several tenants. Agree who holds the report and who pays for upgrades before booking.
- Older shopfronts and listed buildings in Crewe may have narrow side screens and tight gaps that were thought acceptable when fitted. The report weighs what can reasonably be improved.
- Glass leaves need safety glazing and visible markings. Faded or missing manifestation is a common finding, and one of the quickest and cheapest to put right.
- Public buildings in Crewe, such as libraries and leisure centres, often have several doors of different ages. A whole-site inspection puts every door into one ranked report.
- Care homes and hospitals in Crewe have users who move slowly or unpredictably. The inspection pays close attention to sensor coverage and door speeds where frail or confused people pass through.
Safety inspections and risk assessments in Crewe: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Safety inspection and risk assessment, existing door | £125 – £250 | per door, written report, ex VAT |
| Inspection added to a service visit | reduced | quoted with the service |
| Upgrades found by the inspection | quoted separately | see safety and compliance upgrades |
The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Explain the problem. Whether the door is stuck, slow, noisy or due its next check, a short description and a few photos tell us which kind of visit to book for safety inspections and risk assessments and what to bring.
- Visit cost agreed. You get the visit price in writing before we book the engineer. There are no hidden extras: parts and further work are always quoted separately and in advance.
- Engineer on site. The engineer inspects the operator, sensors, tracks and leaves, carries out the repair or service, and runs the door through its safety tests before it goes back into use.
- Follow-up quoted. You are sent a record of the visit. If something else needs attention, we quote it in writing; for doors on a service plan, the next visit date is noted on the record.
Ask for an inspection price for your site in Crewe. Every door is assessed on its hazard zones, and upgrades are quoted separately if you want them.
Safety inspections and risk assessments in Crewe: questions
What if a door in Crewe is found to be unsafe?
The engineer explains the problem before leaving and may recommend switching the door to a safer mode until it is fixed. High-priority findings are flagged at the top of the report. We can quote the repair or upgrade straight away, or you can arrange it with another competent installer.
What do you charge for safety inspections and risk assessments in Crewe?
Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Crewe, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
How long will our door in Crewe be out of use during the inspection?
Usually only for short periods while sensors are tested and the door is observed in different modes. A single door generally takes about an hour in total. For busy entrances the inspection can be planned for a quieter time, or one leaf tested at a time where the door allows it.
Do you carry out automatic door safety inspections in Crewe?
Yes. We organise the inspection and issue the report, and the assessment in Crewe is carried out by a specialist engineer under our management. Each door is assessed on site against BS EN 16005 hazard zones, its safety sensors are tested and you receive a written report with ranked findings. The inspection price is agreed in writing before the visit.
Can visits in Crewe be arranged outside working hours?
Yes, where the site needs it. Early-morning, evening and weekend visits can be arranged for shops, surgeries and offices that cannot lose their entrance during the day. Any difference in price for out-of-hours attendance is agreed in writing before the visit is booked, alongside the standard visit price.
What if a door in Crewe is found to be unsafe?
The engineer explains the problem and, where needed, leaves the door in a safe state, for example switched off or set so it cannot trap or strike anyone. You receive a written note of the issue. The repair or upgrade that would put it right is quoted before any further work is carried out.
Do businesses in Crewe have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.