UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Touch-free and push-button activation · Tyne and Wear

Touch-free and push-button activation in Wallsend

Touch-free switches reduce hand contact on doors in clinics, care homes, washrooms and food areas around Wallsend. We supply and fit them to existing automatic doors, with the detection range set so they react only to a deliberate wave.

Town
Wallsend
Area
Tyne and Wear
Postcodes
NE28
Guide price
From £145 ex VAT (£174 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Wallsend and nearby

We cover the whole of the NE28 postcode district, along with nearby towns in Tyne and Wear. You book each visit for touch-free and push-button activation directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.

Independent businesses in Wallsend often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.

Nearby towns we also list for touch-free and push-button activation (straight-line distance): Hebburn (1.4 miles), Jarrow (2.1 miles), Gateshead (3.4 miles), Newcastle upon Tyne (3.4 miles), North Shields (3.8 miles), South Shields (4.1 miles).

What to think about for touch-free and push-button activation in Wallsend

  • Listed buildings in Wallsend may restrict new fixings on historic walls. Wireless switches mounted on posts or glazing can avoid cutting into original fabric, and are easy to move later.
  • If the door is linked to access control, decide whether the switch should work all the time or only when the access control has released the door. That changes how it is wired.
  • Washrooms and accessible toilets in Wallsend need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
  • Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
  • Homes in Wallsend often need controls for more than one person. Carers, family and the person using the door may each need their own fob or button.

Touch-free and push-button activation in Wallsend: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).

ItemGuide priceNotes
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT; homes £174 – £474 inc VAT
Radio push-button kit£195 – £495buttons and receiver, ex VAT; homes £234 – £594 inc VAT
Key switch or programme switch£145 – £345fitted, ex VAT; homes £174 – £414 inc VAT
Replacement motion (activation) sensor£195 – £495fitted, ex VAT; homes £234 – £594 inc VAT

Standards and rules in England

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for touch-free and push-button activation and book a survey in Wallsend.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Book a free visit in Wallsend and we will recommend activation for each side of each door, then send a written quote.

Touch-free and push-button activation in Wallsend: questions

Can you supply switches for several sites in Wallsend?

Yes. We can survey several doors or buildings and quote each one separately, keeping switch types, heights and symbols the same across all your sites. That makes doors easier to find and use for visitors and staff. Larger orders can be phased site by site.

How much should I budget for touch-free and push-button activation in Wallsend?

Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Wallsend confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you move a push pad that is in the wrong place at our building in Wallsend?

Yes. Moving a pad to a side wall or a post, away from the swinging leaf, often makes a big difference for wheelchair users. We set the new position at survey, quote the work, and test the door with the pad in its new place before we leave.

Do touch-free switches work in cold or wet weather in Wallsend?

Switches for outdoor use are sealed against rain and rated for outdoor temperatures. In exposed spots, a hood or a sheltered position helps. If a switch is outside, we specify one made for that rather than an indoor model, and check it is easy to see and reach in poor light.

What happens once the installation in Wallsend is finished?

The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.

How are payments structured for work in Wallsend?

Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.

Which building regulations apply to a new automatic entrance in Wallsend?

In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.

Next step

Touch-free and push-button activation in Wallsend

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.