Covering Newcastle upon Tyne and nearby
Engineers working under our management travel to addresses across the NE1, NE2, NE3, NE4, NE6 and NE7 postcode districts for touch-free and push-button activation. There is no depot or showroom in Newcastle upon Tyne; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Shopping centre and transport entrances in Newcastle upon Tyne are often on escape routes, so doors there are usually break-out or fail-safe types set up to match the fire strategy for the building. Any work on them is planned with the building's management so the route stays usable.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Gateshead (0.9 miles), Wallsend (3.4 miles), Hebburn (3.9 miles), Jarrow (5.2 miles), Washington (6.4 miles), North Shields (7.2 miles).
What to think about for touch-free and push-button activation in Newcastle upon Tyne
- Washrooms and accessible toilets in Newcastle upon Tyne need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- If the door is linked to access control, decide whether the switch should work all the time or only when the access control has released the door. That changes how it is wired.
- Clinics and surgeries in Newcastle upon Tyne often want touch-free switches on every door patients use. Sealed switch faces that stand up to cleaning products are worth specifying.
- Shops on high streets in Newcastle upon Tyne may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
- Listed buildings in Newcastle upon Tyne may restrict new fixings on historic walls. Wireless switches mounted on posts or glazing can avoid cutting into original fabric, and are easy to move later.
Touch-free and push-button activation in Newcastle upon Tyne: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for touch-free and push-button activation and book a survey in Newcastle upon Tyne.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Tell us which doors need better controls at your building in Newcastle upon Tyne, and we will arrange a free survey and a fixed quote for each device.
Touch-free and push-button activation in Newcastle upon Tyne: questions
Can wave switches in Newcastle upon Tyne be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
What will touch-free and push-button activation in Newcastle upon Tyne cost?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Newcastle upon Tyne confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Our door in Newcastle upon Tyne keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
Can you add touch-free switches to our automatic doors in Newcastle upon Tyne?
Usually, yes. Most operators have spare inputs for extra devices. We check the door, operator and wiring route at a free survey, then quote a fixed price for the switches and fitting. Wireless switches are an option where running cables would be difficult.
What should I send before the survey in Newcastle upon Tyne?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for touch-free and push-button activation together more easily.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Newcastle upon Tyne is agreed before work starts.
Who is responsible for automatic doors on escape routes in Newcastle upon Tyne?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.