Coverage across Tyne and Wear
Here is how coverage works in Tyne and Wear. You contact us with the address and what the door needs, we confirm the price in writing, and a specialist engineer working under our management attends on an agreed date. That applies to touch-free and push-button activation at a single shop door or across a whole estate of buildings, in any of the towns below or between them.
Towns listed in Tyne and Wear: Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington, Tynemouth, Wallsend, North Shields, Whitley Bay, Houghton-le-Spring, Jarrow, Hebburn.
What to think about for touch-free and push-button activation in Tyne and Wear
- Wireless devices need batteries changing from time to time. Choose wired switches for the busiest public doors, and wireless where wiring would be difficult or would spoil a finished wall.
- Look at where people approach the door from. A switch that can only be reached once someone is already at the door, or in the leaf's path, is in the wrong place.
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
- Homes in Tyne and Wear often need controls for more than one person. Carers, family and the person using the door may each need their own fob or button.
Touch-free and push-button activation in Tyne and Wear: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Tyne and Wear.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Ask for a fixed price on touch-free switches, push pads or fobs in Tyne and Wear. The survey is free and nothing is fitted until you accept the quote.
Touch-free and push-button activation in Tyne and Wear: questions
Our door in Tyne and Wear keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
What is the guide price for touch-free and push-button activation in Tyne and Wear?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Tyne and Wear confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does it take to fit activation devices in Tyne and Wear?
Lead time is typically 1 to 3 weeks for the devices. On site, a single switch usually takes an hour or two, and a full set for several doors may take a day. We give the expected time on site with the quote.
Can you supply switches for several sites in Tyne and Wear?
Yes. We can survey several doors or buildings and quote each one separately, keeping switch types, heights and symbols the same across all your sites. That makes doors easier to find and use for visitors and staff. Larger orders can be phased site by site.
What power supply is needed for touch-free and push-button activation in Tyne and Wear?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
How are payments structured for work in Tyne and Wear?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Can a home in Tyne and Wear get help paying for a door opener?
Possibly. In England a Disabled Facilities Grant of up to £30,000 can fund adaptations that make it easier to get in and out of a home. It is means-tested and must be approved by the council before work starts, so ask your council and occupational therapist.