Coverage across Hampshire
For touch-free and push-button activation anywhere in Hampshire, you deal with one contracting party and one written price. We organise the visit, brief the engineer, who works under our management, and keep the paperwork together afterwards. Below you will find the towns we list in this part of England, 23 in all; if your address sits outside them, the arrangements are exactly the same.
Towns listed in Hampshire: Southampton, Portsmouth, Basingstoke, Gosport, Waterlooville, Farnborough, Eastleigh, Winchester, Havant, Andover, Fareham, Aldershot, Fleet, Totton, Chandler's Ford, New Milton, Bordon, Hythe, Yateley, Alton, Emsworth, Hedge End, Romsey.
What to think about for touch-free and push-button activation in Hampshire
- Washrooms and accessible toilets in Hampshire need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- Wireless devices need batteries changing from time to time. Choose wired switches for the busiest public doors, and wireless where wiring would be difficult or would spoil a finished wall.
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
- Car parks and drop-off points in Hampshire benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
- Shops on high streets in Hampshire may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
Touch-free and push-button activation in Hampshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Hampshire and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on touch-free and push-button activation separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free visit in Hampshire and we will recommend activation for each side of each door, then send a written quote.
Touch-free and push-button activation in Hampshire: questions
Our door in Hampshire keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
Is there a guide price for touch-free and push-button activation in Hampshire?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Hampshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you supply switches for several sites in Hampshire?
Yes. We can survey several doors or buildings and quote each one separately, keeping switch types, heights and symbols the same across all your sites. That makes doors easier to find and use for visitors and staff. Larger orders can be phased site by site.
Can wave switches in Hampshire be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
How much disruption should we expect while the work is done in Hampshire?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
What happens once the installation in Hampshire is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do businesses in Hampshire have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.