Coverage across Argyll and Bute
From large town centres to quiet villages, entrances across Argyll and Bute vary a great deal, and the right approach to touch-free and push-button activation varies with them. A surgery door used by patients with walking frames needs different settings from a supermarket entrance, so the engineer looks at the actual door first. The towns we list in this area currently number 7.
Towns listed in Argyll and Bute: Helensburgh, Dunoon, Oban, Campbeltown, Rothesay, Tobermory, Bowmore.
What to think about for touch-free and push-button activation in Argyll and Bute
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
- Listed buildings in Argyll and Bute may restrict new fixings on historic walls. Wireless switches mounted on posts or glazing can avoid cutting into original fabric, and are easy to move later.
- Look at where people approach the door from. A switch that can only be reached once someone is already at the door, or in the leaf's path, is in the wrong place.
- Car parks and drop-off points in Argyll and Bute benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
- Clinics and surgeries in Argyll and Bute often want touch-free switches on every door patients use. Sealed switch faces that stand up to cleaning products are worth specifying.
Touch-free and push-button activation in Argyll and Bute: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in Scotland
Under the Equality Act 2010, service providers and employers in Scotland must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for touch-free and push-button activation and book a survey in Argyll and Bute.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send us photos of the door and the switch you have now, and we will plan better activation for your building in Argyll and Bute.
Touch-free and push-button activation in Argyll and Bute: questions
Can wave switches in Argyll and Bute be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
What will touch-free and push-button activation in Argyll and Bute cost?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Argyll and Bute confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you move a push pad that is in the wrong place at our building in Argyll and Bute?
Yes. Moving a pad to a side wall or a post, away from the swinging leaf, often makes a big difference for wheelchair users. We set the new position at survey, quote the work, and test the door with the pad in its new place before we leave.
Can you supply switches for several sites in Argyll and Bute?
Yes. We can survey several doors or buildings and quote each one separately, keeping switch types, heights and symbols the same across all your sites. That makes doors easier to find and use for visitors and staff. Larger orders can be phased site by site.
Can installation in Argyll and Bute happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
How are payments structured for work in Argyll and Bute?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Is a building warrant needed for a new automatic entrance in Argyll and Bute?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.