Coverage across Argyll and Bute
Multi-site organisations in Argyll and Bute, such as councils, housing providers, schools and health providers, can arrange automatic internal doors for every building through one contact. Each site gets its own written price and its own record. Smaller customers, from corner shops to private homes, follow exactly the same process. The towns we list here, 7 in all, appear below.
Towns listed in Argyll and Bute: Helensburgh, Dunoon, Oban, Campbeltown, Rothesay, Tobermory, Bowmore.
What to think about for automatic internal doors in Argyll and Bute
- Hospitals in Argyll and Bute usually have estates teams with their own standards for door widths, controls and fire alarm interfaces. Share those early so the quote matches them.
- Lightweight stud partitions may not carry an operator without extra support. The survey checks what the wall is made of and what reinforcement is needed.
- Infection control rules may set what materials and controls can be used. Wipe-clean surfaces and sealed switches that stand up to cleaning products are worth specifying.
- Measure what passes through the door, not just the door. Beds, hoists, trolleys and catering equipment can need a wider opening than the current door gives.
- Offices in Argyll and Bute with open-plan floors often have corridor fire doors that are held open by wedges. A proper hold-open device or operator removes the wedge and keeps the door working as a fire door.
Automatic internal doors in Argyll and Bute: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Scotland
Under the Equality Act 2010, service providers and employers in Scotland must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Argyll and Bute and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic internal doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Tell us which corridor, ward or office doors are causing problems in Argyll and Bute, and we will arrange a site visit and a written quote.
Automatic internal doors in Argyll and Bute: questions
How disruptive is the work in an occupied building in Argyll and Bute?
Usually less than people expect. Most swing operators take half a day to a day per door, and sliding doors a little longer. We plan the order of work to keep routes open, control dust, and agree any out-of-hours working in the quote.
Can you give me a price for automatic internal doors in Argyll and Bute?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Argyll and Bute confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit automatic doors in a school in Argyll and Bute?
Yes. Corridor fire doors, dining halls and doors to accessible facilities are common. We usually plan the work for school holidays or after hours, and agree the programme with the school in writing so safeguarding and fire arrangements are maintained throughout.
Can you service the internal doors in Argyll and Bute after fitting?
Yes. We can arrange planned servicing with each door's operator, sensors and fire alarm release checked and a written record left. Servicing is chargeable, and the price per visit is agreed in writing before an engineer attends. Visits can be grouped so several doors are done together.
What power supply is needed for automatic internal doors in Argyll and Bute?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
How are payments structured for work in Argyll and Bute?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Is a building warrant needed for a new automatic entrance in Argyll and Bute?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.