Covering Burton upon Trent and nearby
For telescopic sliding doors, coverage around Burton upon Trent is set by postcode and includes the DE14 and DE15 postcode districts, as well as nearby addresses in Staffordshire. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
Business parks around Burton upon Trent tend to have reception doors that see steady rather than heavy traffic, often with access control after hours. A swing or sliding operator linked to a card reader or intercom is a common arrangement for entrances like these.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Swadlincote (4.2 miles), Derby (10.6 miles), Lichfield (11.6 miles), Tamworth (12.2 miles), Rugeley (12.7 miles), Coalville (12.8 miles).
What to think about for telescopic sliding doors in Burton upon Trent
- If the entrance is on an escape route, ask your fire risk assessor what the door must do before ordering. Break-out telescopic leaves have to be chosen at the start, because they cannot be added afterwards.
- Entrances used by ambulances and patient transport in Burton upon Trent benefit from a full-opening button for crews, while everyday visitors use a narrower partial opening that keeps the waiting area warmer.
- Care homes and supported living buildings in Burton upon Trent may want the main door to open freely for visitors but stay locked for some residents. A keypad or fob reader on the inside can be wired to the operator.
- A telescopic header is deeper than a standard one. In older buildings in Burton upon Trent with low ceilings or decorative fanlights, the survey checks whether the header can sit above the opening or needs to be recessed.
- Floor guides on two sets of leaves need a level, firm floor. Cracked screed, rocking tiles or a sloping threshold should be put right before fitting, and the quote will say who does it.
Telescopic sliding doors in Burton upon Trent: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for telescopic sliding doors and book a survey in Burton upon Trent.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Tell us the width you need and the space either side, and we will arrange a free survey in Burton upon Trent for a telescopic sliding door.
Telescopic sliding doors in Burton upon Trent: questions
How much wider will our entrance in Burton upon Trent be with telescopic doors?
As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in Burton upon Trent shows the exact clear width before you commit.
How are prices worked out for telescopic sliding doors in Burton upon Trent?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Burton upon Trent confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do we need to close our building in Burton upon Trent while the door is fitted?
Usually not for long. Most telescopic entrances take one to two days on site, and the opening can be secured overnight. Where the entrance is the only way in, we plan the work around your hours, use another entrance if there is one, or work early or at weekends, with any extra cost shown in the quote.
Can our existing sliding door in Burton upon Trent be converted to telescopic?
Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.
What do you need from us for parking and access in Burton upon Trent?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
What does the free site survey in Burton upon Trent involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for telescopic sliding doors, with drawings where the door type needs them.
Do businesses in Burton upon Trent have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.