Covering Burton upon Trent and nearby
From shops and surgeries to schools, care homes and private houses, any building in the DE14 and DE15 postcode districts can be covered for frameless glass automatic doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Town-centre buildings in Burton upon Trent range from modern units to older shopfronts. Older frontages can have uneven floors, limited head height and timber frames that need checking before an operator is fitted or adjusted, and the engineer looks at these on site.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Swadlincote (4.2 miles), Derby (10.6 miles), Lichfield (11.6 miles), Tamworth (12.2 miles), Rugeley (12.7 miles), Coalville (12.8 miles).
What to think about for frameless glass automatic doors in Burton upon Trent
- Power has to reach the operator above the door. In glass partitions there may be nowhere to hide a cable, so plan the route through the ceiling or a slim trunking from the start.
- Clear glass is easy to walk into. Plan manifestation at the outset, whether frosted bands or a pattern based on your logo, rather than adding stickers after the door is fitted.
- Cleaning staff at busy venues in Burton upon Trent should use non-abrasive products on frameless doors, keep the floor guide clear of grit and report any chipped glass edge straight away.
- Floor guides need a sound floor. Where the entrance has stone, tiles or polished concrete, agree whether a channel will be cut or a small surface guide fixed, and who makes good the finish.
- Glass partitions in office buildings across Staffordshire are often supplied by a fit-out contractor. Share their drawings with us so the door glass, gaps and finishes match the rest of the screens.
Frameless glass automatic doors in Burton upon Trent: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Burton upon Trent and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on frameless glass automatic doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free survey in Burton upon Trent and get honest advice on whether a frameless door suits your entrance, plus a fixed written quote.
Frameless glass automatic doors in Burton upon Trent: questions
Will a frameless door suit our street entrance in Burton upon Trent?
It depends on exposure. Sheltered entrances, recessed doorways and doors behind a canopy usually suit frameless glass well. A door facing straight onto a windy street may suffer from draughts and noise. We will give you an honest view at the survey and, where needed, suggest a framed door or a frameless inner door in a lobby.
How are prices worked out for frameless glass automatic doors in Burton upon Trent?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Burton upon Trent confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit frameless glass automatic doors in Burton upon Trent?
Yes. We arrange supply and installation in Burton upon Trent and throughout Staffordshire, with specialist automatic door engineers working under our management carrying out the survey and fitting. We are the contracting party, so one company is responsible for the glass, the operator, the installation and the paperwork at handover.
Is the survey for a frameless door in Burton upon Trent free?
Yes. For a new frameless automatic door, the survey is free and you are under no obligation. The engineer measures the opening, checks the structure above and the floor below, discusses glass and fittings, and you then receive a drawing and a fixed, itemised written quote.
What power supply is needed for frameless glass automatic doors in Burton upon Trent?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Do you service doors in Burton upon Trent after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Who is responsible for automatic doors on escape routes in Burton upon Trent?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.