Coverage across Kent
Multi-site organisations in Kent, such as councils, housing providers, schools and health providers, can arrange telescopic sliding doors for every building through one contact. Each site gets its own written price and its own record. Smaller customers, from corner shops to private homes, follow exactly the same process. The towns we list here, 24 in all, appear below.
Towns listed in Kent: Maidstone, Gillingham, Chatham, Tunbridge Wells, Folkestone, Margate, Ashford, Canterbury, Sittingbourne, Gravesend, Dartford, Ramsgate, Dover, Tonbridge, Strood, Whitstable, Deal, Sevenoaks, Rochester, Herne Bay, Northfleet, Broadstairs, Faversham, Swanley.
What to think about for telescopic sliding doors in Kent
- Medical centres in Kent often share a frontage with a pharmacy or other units. Check who owns the shopfront and whether the landlord needs to approve a new entrance before the survey drawing is finalised.
- Care homes and supported living buildings in Kent may want the main door to open freely for visitors but stay locked for some residents. A keypad or fob reader on the inside can be wired to the operator.
- Grit and leaves blown into the threshold collect in floor guide channels. Entrances facing a car park or open ground benefit from a matwell or canopy, which also keeps rain off the sensors.
- Entrances used by ambulances and patient transport in Kent benefit from a full-opening button for crews, while everyday visitors use a narrower partial opening that keeps the waiting area warmer.
- Power for the operator usually comes from a fused spur at the head of the door. Where the nearest supply is some distance away, plan for an electrician to run a new circuit before the fitting day.
Telescopic sliding doors in Kent: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for telescopic sliding doors in Kent, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Tell us the width you need and the space either side, and we will arrange a free survey in Kent for a telescopic sliding door.
Telescopic sliding doors in Kent: questions
Can our existing sliding door in Kent be converted to telescopic?
Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.
What price range should I expect for telescopic sliding doors in Kent?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Kent confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do we need to close our building in Kent while the door is fitted?
Usually not for long. Most telescopic entrances take one to two days on site, and the opening can be secured overnight. Where the entrance is the only way in, we plan the work around your hours, use another entrance if there is one, or work early or at weekends, with any extra cost shown in the quote.
What paperwork do we get after installation in Kent?
You receive the commissioning and test record, a site-specific risk assessment, user instructions and the conformity paperwork for the door. Keep them with your building records. They are the starting point for later servicing and safety inspections, and they show how the door was set up with reference to BS EN 16005.
What power supply is needed for telescopic sliding doors in Kent?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
What does the written quote for telescopic sliding doors in Kent include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
Who is responsible for automatic doors on escape routes in Kent?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.