Coverage across Kent
Automatic folding doors across Kent follows a simple pattern: you tell us about the door, we agree the price in writing, and a specialist engineer working under our management attends. Distance within the area does not change the process. Use the links below to reach the 24 towns we list, each with its own page, nearby places and guide prices.
Towns listed in Kent: Maidstone, Gillingham, Chatham, Tunbridge Wells, Folkestone, Margate, Ashford, Canterbury, Sittingbourne, Gravesend, Dartford, Ramsgate, Dover, Tonbridge, Strood, Whitstable, Deal, Sevenoaks, Rochester, Herne Bay, Northfleet, Broadstairs, Faversham, Swanley.
What to think about for automatic folding doors in Kent
- Shops with roller shutters need the folded leaves to clear the shutter guide channels. Both are measured together so the door and shutter work side by side.
- Glass kiosks in shopping centres usually have landlord fit-out rules. Ask centre management about working hours, power and alarm connections before installation is booked, so the date does not slip.
- Pavements in older parts of Kent often slope or dip at the threshold. Bottom pivots need a level, solid floor, so the survey records levels and any work needed.
- Fold direction matters. Folding inwards keeps the pavement clear but takes a little space inside the shop; folding outwards suits internal doors where room inside is tight.
- Check what sits beside the doorway. Displays, A-boards, bins and queues in the area where the leaves fold can stop the door or set off its sensors, so plan a clear zone.
Automatic folding doors in Kent: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Automatic folding door, up to about 2 m clear opening | £5,995 – £10,995 | installed, ex VAT |
| Folding door with break-out for an escape route | top of range or on survey | depends on the fire strategy |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Describe what you need. Whether the job is automatic folding doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Kent.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Book a free survey in Kent to see the clear width, fold direction and fixed price for automatic folding doors at your premises.
Automatic folding doors in Kent: questions
Can a folding door in Kent open with a push button instead of a sensor?
Yes. Many shops use a radar sensor so the door opens as customers approach, but push pads, wave-to-open switches or a key switch can be used instead or as well. Internal doors often use push buttons, so the door only opens when someone needs it.
What price range should I expect for automatic folding doors in Kent?
Our guide starts from £5,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Kent confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What happens after the folding door in Kent is installed?
You receive the test record, a site-specific risk assessment and user instructions, and staff are shown the programme switch and how to fold the door by hand. Planned servicing can then be arranged, with each visit priced in writing before an engineer attends.
Will a folding door fit our narrow shopfront in Kent?
Very often, yes. Folding doors need almost no wall space beside the opening, so they suit frontages that run from wall to wall. The survey checks the opening, the structure above and the space for the folded leaves, and the drawing shows exactly how much clear width you will get.
How are payments structured for work in Kent?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
What happens to the old door when a new one is fitted in Kent?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Which building regulations apply to a new automatic entrance in Kent?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.