UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic entrance lobbies · Clwyd

Automatic entrance lobbies in Flint

Adding an inner set of doors to an existing entrance is often the simplest way to form a lobby in Flint. We check the depth, the floor and the power, then quote for the new doors, the screens and the link between the two sets.

Town
Flint
Area
Clwyd
Postcodes
CH6
Guide price
Typically £14,995 to £34,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Flint and nearby

If your building is in Flint, or anywhere in the CH6 postcode district, we can arrange automatic entrance lobbies. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.

Doors at quieter sites in Flint and elsewhere in Clwyd can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.

Nearby towns we also list for automatic entrance lobbies (straight-line distance): Connah's Quay (4.7 miles), Mold (5.4 miles), Buckley (5.8 miles), Heswall (5.9 miles), Bebington (8.7 miles), Ellesmere Port (9.8 miles).

What to think about for automatic entrance lobbies in Flint

  • Measure the depth you can give the lobby before settling on a layout. A lobby that is too shallow lets both sets open together and loses most of its benefit.
  • Work on a lobby in Flint takes longer than a door swap. Ask for the programme in writing, including which entrance stays usable each day and any out-of-hours working.
  • Listed buildings and conservation areas in Flint may limit changes to the frontage. An internal lobby behind the existing doors often keeps the street view unchanged, though consent may still be needed.
  • Office buildings on business parks in Flint often have a reception desk close to the entrance. Keeping the desk out of line with the doors, and making the lobby deep enough, keeps the receptionist out of the draught.
  • Where an over-door heater is fitted, check its settings once the lobby is working. Many buildings find the heater can run at a lower setting afterwards.

Automatic entrance lobbies in Flint: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £14,995 to £34,995 ex VAT.

ItemGuide priceNotes
Draught lobby: two sets of automatic sliding doors and glazed screens£14,995 – £34,995doors and screens, installed, ex VAT
Lobby with curtain walling or building workPriced on surveylarger public-sector lobbies have cost £50,000 or more
Card or fob reader tied into the door£795 – £2,495per door, ex VAT
Battery backup for power-cut operation£395 – £695per door, ex VAT

Lobby prices cover the doors and glazed screens. Building work, flooring, heating and curtain walling are priced on survey.

Standards and rules in Wales

Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.

Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic entrance lobbies and book a survey in Flint.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

If the front of your building in Flint is cold and draughty, start with a free survey. Nothing is ordered until you accept the written quote.

Automatic entrance lobbies in Flint: questions

How will a lobby cope with the weather in Flint?

The survey looks at which way the entrance faces and how exposed it is. In windy or wet spots, a deeper lobby, a right-angle layout or doors with stronger seals and wind settings help. A good matting well deals with the water that still comes in on shoes.

Is there a guide price for automatic entrance lobbies in Flint?

Our guide is £14,995 to £34,995 excluding VAT (per lobby, doors and screens), the same guide prices we use across the UK. The free site survey in Flint confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Do you design lobbies for new buildings in Flint?

Yes. We can work from the architect's drawings, suggest door types and depth, and quote the doors, screens and controls as one package for the main contractor or the client. Designing the lobby in at the start is usually simpler and cheaper than adding it later.

Will our entrance in Flint have to close while the lobby is built?

Not for the whole job in most cases. We plan the order of work so one set of doors, or a temporary door, keeps the entrance usable, and agree any out-of-hours working in the quote. A short closure may be needed when the final set is commissioned.

What happens once the installation in Flint is finished?

The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.

How much disruption should we expect while the work is done in Flint?

Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.

Do businesses in Flint have to fit automatic doors?

There is no blanket requirement. Service providers and employers must make reasonable adjustments for disabled people under the Equality Act 2010, and Welsh building regulations guidance expects entrances that are easy to open. An automatic door is a common way to meet both.

Next step

Automatic entrance lobbies in Flint

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.