Covering Newcastle upon Tyne and nearby
Sites across the NE1, NE2, NE3, NE4, NE6 and NE7 postcode districts are visited by specialist automatic door engineers working under our management. They travel to Newcastle upon Tyne for sensor upgrades and replacement as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.
Older civic and commercial buildings often sit alongside modern blocks in Newcastle upon Tyne and the surrounding parts of Tyne and Wear. Where a listed building or a conservation area is involved, the owner may need consent from the planning authority before work on the entrance starts.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Gateshead (0.9 miles), Wallsend (3.4 miles), Hebburn (3.9 miles), Jarrow (5.2 miles), Washington (6.4 miles), North Shields (7.2 miles).
What to think about for sensor upgrades and replacement in Newcastle upon Tyne
- Shopping parades and older shopfronts in Newcastle upon Tyne sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
- After a near miss at a door in Newcastle upon Tyne, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
- Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
- Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Newcastle upon Tyne so the zones can be set for the new surface.
- Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
Sensor upgrades and replacement in Newcastle upon Tyne: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Share the details. Send the address in Newcastle upon Tyne, the door type and make if you know it, and a description or video of the problem. For servicing, tell us how many doors there are and how busy each one is.
- Price confirmed in writing. We agree the visit price in writing before an engineer attends. Some straightforward repairs can be priced in full from photos and the make and model of the door.
- Diagnosis and repair. A specialist engineer attends on the agreed date, finds the cause, repairs or services the door, and tests its operation, sensors and safety functions with reference to BS EN 16005.
- Written record. Each visit ends with a written record for your files. Anything still outstanding, such as parts on order or recommended upgrades, is quoted before any further work is done.
Get your door detecting people properly again. Contact us about sensor replacement in Newcastle upon Tyne, with the visit cost confirmed before anyone attends.
Sensor upgrades and replacement in Newcastle upon Tyne: questions
Can you price new sensors for my door in Newcastle upon Tyne from photos?
Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.
What is the guide price for sensor upgrades and replacement in Newcastle upon Tyne?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Newcastle upon Tyne, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can you upgrade sensors on an old door in Newcastle upon Tyne?
Most older doors can take modern sensors. A few very old controllers cannot monitor current safety sensors. If yours is one of them, we explain whether a controller upgrade or a new drive unit is the better option, and quote it, before any work is done.
Do engineers carry sensors for doors in Newcastle upon Tyne?
Engineers carry common combined and safety sensors, so many replacements can be fitted at the first visit. Light curtains and specialist sensors are ordered once the door is identified, with delivery typically 1 to 2 weeks. Photos in advance help us bring the right part first time.
Do you offer service contracts in Newcastle upon Tyne?
Yes. A service contract sets out how many visits a year each door receives, what each visit includes and the price, all agreed in writing before you sign. Contracts suit sites with several doors or busy entrances, because visits are planned ahead and the records stay in one place. Contract length and notice terms are shown in the agreement.
Are parts quoted before they are fitted?
Always. If a repair or service in Newcastle upon Tyne needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.
Which building regulations apply to a new automatic entrance in Newcastle upon Tyne?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.