UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Sensor upgrades and replacement · Lanarkshire

Sensor upgrades and replacement in Wishaw

We fit new sensors to sliding, swing, folding and revolving doors in Wishaw and other parts of Scotland. The work is carried out by specialist engineers working under our management, with the price agreed beforehand and each sensor tested with a test body.

Town
Wishaw
Area
Lanarkshire
Postcodes
ML2
Guide price
Typically £195 to £495 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Wishaw and nearby

We do not keep premises in Wishaw. Instead, enquiries about sensor upgrades and replacement come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the ML2 postcode district on a date that suits the site.

Independent businesses in Wishaw often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.

Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Larkhall (3.0 miles), Motherwell (3.3 miles), Carluke (4.0 miles), Hamilton (4.5 miles), Bellshill (5.2 miles), Blantyre (7.2 miles).

What to think about for sensor upgrades and replacement in Wishaw

  • Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.
  • Swing doors in narrow corridors need sensors on the leaf to protect people on both sides. The engineer checks the swing path and any walls or fittings close by.
  • If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
  • Rain, snow and blowing leaves can trigger radar sensors over exposed doors. Some sensors filter weather better than others, which the engineer weighs up when choosing a replacement.
  • Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.

Sensor upgrades and replacement in Wishaw: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Touch-free switch or push pad£145 – £395per switch, ex VAT
Side-screen or light-curtain protectionfrom £295per door, ex VAT; on survey

Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.

Standards and rules in Scotland

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.

BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.

How it works

  1. Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for sensor upgrades and replacement can be planned.
  2. Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
  3. On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
  4. Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.

Send a photo of the door and sensor at your building in Wishaw, and we will confirm the visit price and the likely sensor before booking an engineer.

Sensor upgrades and replacement in Wishaw: questions

Can you price new sensors for my door in Wishaw from photos?

Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.

What price range should I expect for sensor upgrades and replacement in Wishaw?

Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Wishaw, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

Will new sensors stop false openings at our entrance in Wishaw?

Usually. Modern sensors can ignore cross traffic and detect only people moving towards the door, and the zone can be narrowed. If the entrance faces a busy street or catches heavy weather, the engineer may suggest a sensor that filters those conditions better.

Can a risk assessment in Wishaw tell us which sensors we need?

Yes. A safety inspection tests each hazard zone and records where sensor coverage is missing or poor. The report then lists the sensors or light curtains needed, and we can quote those items exactly as listed, or you can pass the report to another competent installer.

Can you take over servicing of doors in Wishaw from another company?

Yes. Send us the door details and, if you have them, previous service records or inspection reports. The first visit gives a baseline for each door, and its price is agreed in writing beforehand. From then on, records continue in one consistent format, whichever company looked after the doors before.

Do you leave a written record after each visit in Wishaw?

Yes. Every visit ends with a written record of what was checked, what was done and anything that still needs attention. For safety inspections you receive a report of the findings and a site-specific risk assessment. Keeping these on file is the usual way to show that a workplace door is maintained and in good working order.

Who is responsible for automatic doors on escape routes in Wishaw?

The person responsible for fire safety under the Fire (Scotland) Act 2005 for those premises. Scottish guidance allows automatic doors on escape routes only where they fail safely to outward opening or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.

Next step

Sensor upgrades and replacement in Wishaw

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.