UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Sensor upgrades and replacement · Lanarkshire

Sensor upgrades and replacement in Carluke

If the automatic door at your premises in Carluke keeps opening for passing traffic, or stops short for no reason, the sensors are a likely cause. Send us a photo of the sensor and the door, and we will confirm the visit price in writing.

Town
Carluke
Area
Lanarkshire
Postcodes
ML8
Guide price
Typically £195 to £495 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Carluke and nearby

Homes, businesses and public buildings throughout the ML8 postcode district can arrange sensor upgrades and replacement with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Carluke for the job rather than working from premises in town.

Small offices, community centres and village halls around Carluke tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.

Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Wishaw (4.0 miles), Larkhall (5.3 miles), Motherwell (7.3 miles), Hamilton (8.2 miles), Bellshill (9.1 miles), Whitburn (10.7 miles).

What to think about for sensor upgrades and replacement in Carluke

  • Sites in Carluke that open early or close late may want sensor work done outside trading hours. Tell us the quieter times when you book the visit.
  • Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Carluke so the zones can be set for the new surface.
  • Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.
  • Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
  • Swing doors in narrow corridors need sensors on the leaf to protect people on both sides. The engineer checks the swing path and any walls or fittings close by.

Sensor upgrades and replacement in Carluke: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Touch-free switch or push pad£145 – £395per switch, ex VAT
Side-screen or light-curtain protectionfrom £295per door, ex VAT; on survey

Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.

Standards and rules in Scotland

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.

BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.

How it works

  1. Share the details. Send the address in Carluke, the door type and make if you know it, and a description or video of the problem. For servicing, tell us how many doors there are and how busy each one is.
  2. Price confirmed in writing. We agree the visit price in writing before an engineer attends. Some straightforward repairs can be priced in full from photos and the make and model of the door.
  3. Diagnosis and repair. A specialist engineer attends on the agreed date, finds the cause, repairs or services the door, and tests its operation, sensors and safety functions with reference to BS EN 16005.
  4. Written record. Each visit ends with a written record for your files. Anything still outstanding, such as parts on order or recommended upgrades, is quoted before any further work is done.

Ask for a price on new safety or activation sensors in Carluke. Each one is set up for the door's hazard zones and tested before the engineer leaves.

Sensor upgrades and replacement in Carluke: questions

Will you record the sensor settings for our building in Carluke?

Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.

Is there a guide price for sensor upgrades and replacement in Carluke?

Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Carluke, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

Can a risk assessment in Carluke tell us which sensors we need?

Yes. A safety inspection tests each hazard zone and records where sensor coverage is missing or poor. The report then lists the sensors or light curtains needed, and we can quote those items exactly as listed, or you can pass the report to another competent installer.

Our door in Carluke closes on people. Is that a sensor fault?

It is likely, and the door should be treated as unsafe. Switch it to a safe mode, such as manual or open, and keep people away from the leaves. Tell us it is unsafe and we will give you the earliest visit we can offer, then the engineer will check the safety sensors and their zones.

Are parts quoted before they are fitted?

Always. If a repair or service in Carluke needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.

Do you offer service contracts in Carluke?

Yes. A service contract sets out how many visits a year each door receives, what each visit includes and the price, all agreed in writing before you sign. Contracts suit sites with several doors or busy entrances, because visits are planned ahead and the records stay in one place. Contract length and notice terms are shown in the agreement.

Who is responsible for automatic doors on escape routes in Carluke?

The person responsible for fire safety under the Fire (Scotland) Act 2005 for those premises. Scottish guidance allows automatic doors on escape routes only where they fail safely to outward opening or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.

Next step

Sensor upgrades and replacement in Carluke

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.