Covering Sittingbourne and nearby
If your building is in Sittingbourne, or anywhere in the ME10 postcode district, we can arrange sensor upgrades and replacement. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Schools and colleges in and around Sittingbourne often want work done in the holidays, when entrances can be taken out of use without disrupting pupils. Planning ahead for half-term or summer dates makes it easier to find a slot that suits the timetable.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Faversham (7.0 miles), Gillingham (8.6 miles), Chatham (9.2 miles), Rochester (10.3 miles), Maidstone (10.7 miles), Strood (11.6 miles).
What to think about for sensor upgrades and replacement in Sittingbourne
- Shopping parades and older shopfronts in Sittingbourne sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
- Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Sittingbourne so the zones can be set for the new surface.
- Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.
- Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
- Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
Sensor upgrades and replacement in Sittingbourne: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
How it works
- Report the fault or service. Let us know whether the door has failed, is behaving oddly or is simply due a service or safety inspection. A short video of the problem helps the engineer prepare for the visit.
- Agree the price first. Before anyone travels to Sittingbourne, the visit price is set out in writing. It is based on the door type, the work requested and the location, so you know the cost in advance.
- Diagnose, repair, test. On site, the engineer finds the cause and puts it right where the parts are to hand, or completes the planned service. Sensors, safety functions and emergency behaviour are checked before the door returns to use.
- Paperwork and next steps. A written record of the visit is left with you or sent afterwards. If parts must be ordered or more work is advisable, it is quoted separately and only goes ahead once you accept.
For doors that open for passers-by or close too soon in Sittingbourne, talk to us about new sensors and detection zones set for your entrance.
Sensor upgrades and replacement in Sittingbourne: questions
Can you price new sensors for my door in Sittingbourne from photos?
Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.
How much should I budget for sensor upgrades and replacement in Sittingbourne?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Sittingbourne, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can a risk assessment in Sittingbourne tell us which sensors we need?
Yes. A safety inspection tests each hazard zone and records where sensor coverage is missing or poor. The report then lists the sensors or light curtains needed, and we can quote those items exactly as listed, or you can pass the report to another competent installer.
Our door in Sittingbourne closes on people. Is that a sensor fault?
It is likely, and the door should be treated as unsafe. Switch it to a safe mode, such as manual or open, and keep people away from the leaves. Tell us it is unsafe and we will give you the earliest visit we can offer, then the engineer will check the safety sensors and their zones.
What if a door in Sittingbourne is found to be unsafe?
The engineer explains the problem and, where needed, leaves the door in a safe state, for example switched off or set so it cannot trap or strike anyone. You receive a written note of the issue. The repair or upgrade that would put it right is quoted before any further work is carried out.
How is the visit price set for work in Sittingbourne?
We agree the visit price with you in writing before an engineer attends. It is based on the type of door, the work requested and the location. If parts or further work are needed once the engineer has found the cause, those are quoted before they are done, so the cost never moves without your agreement.
Which building regulations apply to a new automatic entrance in Sittingbourne?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.