UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Safety inspections and risk assessments · West Yorkshire

Safety inspections and risk assessments in Yeadon

Inspections in Yeadon are carried out by specialist automatic door engineers working under our management. They use a test body to check each sensor's coverage, observe the door in use and write up every door to the same format.

Town
Yeadon
Area
West Yorkshire
Postcodes
LS19
Guide price
Typically £125 to £250 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Yeadon and nearby

Homes, businesses and public buildings throughout the LS19 postcode district can arrange safety inspections and risk assessments with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Yeadon for the job rather than working from premises in town.

Parking on a busy high street can be tight. When work is booked in Yeadon, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.

Nearby towns we also list for safety inspections and risk assessments (straight-line distance): Guiseley (1.3 miles), Horsforth (2.5 miles), Shipley (3.9 miles), Pudsey (4.9 miles), Bradford (5.5 miles), Bingley (6.3 miles).

What to think about for safety inspections and risk assessments in Yeadon

  • Older shopfronts and listed buildings in Yeadon may have narrow side screens and tight gaps that were thought acceptable when fitted. The report weighs what can reasonably be improved.
  • Programme switches left in the wrong mode cause many incidents. The inspection checks the switch is secure, labelled and set correctly for each time of day.
  • Power failure behaviour is easy to overlook. The inspection tests what the door does when the mains supply or battery fails, which matters most on escape routes.
  • Doors on escape routes must let people out safely during a fire or evacuation. The inspection checks break-out, power-failure opening or manual release, as the fire strategy requires.
  • Insurers sometimes ask for inspection reports at renewal. Booking the inspection well before the renewal date gives you time to act on any high-priority findings first.

Safety inspections and risk assessments in Yeadon: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.

ItemGuide priceNotes
Safety inspection and risk assessment, existing door£125 – £250per door, written report, ex VAT
Inspection added to a service visitreducedquoted with the service
Upgrades found by the inspectionquoted separatelysee safety and compliance upgrades

The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.

Standards and rules in England

BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.

How it works

  1. Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Yeadon and how much the site depends on the door.
  2. Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
  3. Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
  4. Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.

Combine servicing and a safety inspection in Yeadon in one visit. Contact us with your door details for a written price covering both.

Safety inspections and risk assessments in Yeadon: questions

Do you carry out automatic door safety inspections in Yeadon?

Yes. We organise the inspection and issue the report, and the assessment in Yeadon is carried out by a specialist engineer under our management. Each door is assessed on site against BS EN 16005 hazard zones, its safety sensors are tested and you receive a written report with ranked findings. The inspection price is agreed in writing before the visit.

How much should I budget for safety inspections and risk assessments in Yeadon?

Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Yeadon, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

How long will our door in Yeadon be out of use during the inspection?

Usually only for short periods while sensors are tested and the door is observed in different modes. A single door generally takes about an hour in total. For busy entrances the inspection can be planned for a quieter time, or one leaf tested at a time where the door allows it.

Do we have to use you for the upgrades the inspection recommends in Yeadon?

No. The report is yours, and any competent installer can carry out the work. If you want us to do it, each upgrade is quoted separately and itemised, so you can phase the work and start with the high-priority items.

Do you offer service contracts in Yeadon?

Yes. A service contract sets out how many visits a year each door receives, what each visit includes and the price, all agreed in writing before you sign. Contracts suit sites with several doors or busy entrances, because visits are planned ahead and the records stay in one place. Contract length and notice terms are shown in the agreement.

Can you take over servicing of doors in Yeadon from another company?

Yes. Send us the door details and, if you have them, previous service records or inspection reports. The first visit gives a baseline for each door, and its price is agreed in writing beforehand. From then on, records continue in one consistent format, whichever company looked after the doors before.

Who is responsible for automatic doors on escape routes in Yeadon?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Safety inspections and risk assessments in Yeadon

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.