Covering Pudsey and nearby
From shops and surgeries to schools, care homes and private houses, any building in the LS28 postcode district can be covered for safety inspections and risk assessments. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Many buildings in Pudsey are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for safety inspections and risk assessments (straight-line distance): Horsforth (3.4 miles), Bradford (3.7 miles), Morley (4.6 miles), Leeds (4.6 miles), Yeadon (4.9 miles), Shipley (5.0 miles).
What to think about for safety inspections and risk assessments in Pudsey
- Older shopfronts and listed buildings in Pudsey may have narrow side screens and tight gaps that were thought acceptable when fitted. The report weighs what can reasonably be improved.
- Programme switches left in the wrong mode cause many incidents. The inspection checks the switch is secure, labelled and set correctly for each time of day.
- Public buildings in Pudsey, such as libraries and leisure centres, often have several doors of different ages. A whole-site inspection puts every door into one ranked report.
- Shared entrances in office blocks and business parks in Pudsey may serve several tenants. Agree who holds the report and who pays for upgrades before booking.
- Power failure behaviour is easy to overlook. The inspection tests what the door does when the mains supply or battery fails, which matters most on escape routes.
Safety inspections and risk assessments in Pudsey: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Safety inspection and risk assessment, existing door | £125 – £250 | per door, written report, ex VAT |
| Inspection added to a service visit | reduced | quoted with the service |
| Upgrades found by the inspection | quoted separately | see safety and compliance upgrades |
The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
How it works
- Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for safety inspections and risk assessments can be planned.
- Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
- On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
- Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.
Combine servicing and a safety inspection in Pudsey in one visit. Contact us with your door details for a written price covering both.
Safety inspections and risk assessments in Pudsey: questions
How long will our door in Pudsey be out of use during the inspection?
Usually only for short periods while sensors are tested and the door is observed in different modes. A single door generally takes about an hour in total. For busy entrances the inspection can be planned for a quieter time, or one leaf tested at a time where the door allows it.
How much should I budget for safety inspections and risk assessments in Pudsey?
Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Pudsey, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can you inspect all the doors on our site in Pudsey in one visit?
Usually, yes. A whole-site inspection covers every automatic door in one visit and one report, with each door's findings ranked so you can compare priorities across the site. Larger sites may need more than one day, which we agree with you when the inspection is priced.
Our insurer in Pudsey has asked for a risk assessment. Is this what they mean?
Most likely. Insurers usually want a documented, site-specific risk assessment of the door by a competent person, along with service records. Check their exact wording and send it to us. Our report covers the door's hazard zones, test results and recommended actions, which is what most insurers expect to see.
Do you offer service contracts in Pudsey?
Yes. A service contract sets out how many visits a year each door receives, what each visit includes and the price, all agreed in writing before you sign. Contracts suit sites with several doors or busy entrances, because visits are planned ahead and the records stay in one place. Contract length and notice terms are shown in the agreement.
Are parts quoted before they are fitted?
Always. If a repair or service in Pudsey needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.
Which building regulations apply to a new automatic entrance in Pudsey?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.