UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · West Yorkshire

Automatic door refurbishment in Yeadon

We refurbish automatic sliding, swing and folding doors for clients in Yeadon and across England. Each job is carried out by specialist engineers working under our management, and the door is set up and tested again once the new parts are in.

Town
Yeadon
Area
West Yorkshire
Postcodes
LS19
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Yeadon and nearby

Homes, businesses and public buildings throughout the LS19 postcode district can arrange automatic door refurbishment with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Yeadon for the job rather than working from premises in town.

In Yeadon, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Guiseley (1.3 miles), Horsforth (2.5 miles), Shipley (3.9 miles), Pudsey (4.9 miles), Bradford (5.5 miles), Bingley (6.3 miles).

What to think about for automatic door refurbishment in Yeadon

  • Floors around the door in Yeadon may be worn or uneven. New floor guides and thresholds sometimes need small areas of making good, which the quote lists separately.
  • Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
  • Older shopfronts with discontinued door systems may need equivalent parts rather than exact matches. The survey identifies what is still available before anything is ordered.
  • If the operator is close to the end of its life, refurbishing the running gear while fitting a new drive unit saves a second visit and a second set-up.
  • Care settings in Yeadon benefit from level thresholds and smooth-running leaves that do not snag walking frames, trolleys or wheelchair footplates as people pass through.

Automatic door refurbishment in Yeadon: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
  2. Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
  3. Quote in writing. You receive a fixed, itemised quote for automatic door refurbishment in Yeadon, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
  4. Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.

Before replacing an automatic door in Yeadon, ask us to price refurbishment. The survey is free and shows exactly what is worth keeping.

Automatic door refurbishment in Yeadon: questions

Can you refurbish a door in Yeadon that another company installed?

Yes. We refurbish doors whoever fitted them. The survey identifies the door system, and matching or equivalent rollers, guides, seals and glass are then sourced for it. If a part is no longer made, the quote explains the alternative.

How much should I budget for automatic door refurbishment in Yeadon?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Yeadon confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you replace a single broken glass leaf in Yeadon?

Yes. The leaf is made safe, measured and reglazed with new safety glass, or replaced completely if its frame is damaged. New glass is typically 2 to 4 weeks from order. Once the leaf is rehung, the door is set up again and the track and floor guide are checked.

Will our entrance in Yeadon stay open during refurbishment?

Often, at least in part. Many jobs can be done one leaf at a time, and the work can be planned for quieter hours. If the entrance does need to close, the quote says for how long, so you can arrange another way in for staff and visitors.

What does the free site survey in Yeadon involve?

An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic door refurbishment, with drawings where the door type needs them.

What power supply is needed for automatic door refurbishment in Yeadon?

Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.

Do businesses in Yeadon have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Automatic door refurbishment in Yeadon

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.