UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Safety inspections and risk assessments · Kent

Safety inspections and risk assessments in Dartford

A safety inspection in Dartford gives you a written, site-specific risk assessment of each automatic door against BS EN 16005. The engineers we send test the sensors on every hazard zone, record the findings with priorities and agree the inspection price with you in writing beforehand.

Town
Dartford
Area
Kent
Postcodes
DA1, DA2
Guide price
Typically £125 to £250 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Dartford and nearby

Sites across the DA1 and DA2 postcode districts are visited by specialist automatic door engineers working under our management. They travel to Dartford for safety inspections and risk assessments as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.

Business parks around Dartford tend to have reception doors that see steady rather than heavy traffic, often with access control after hours. A swing or sliding operator linked to a card reader or intercom is a common arrangement for entrances like these.

Nearby towns we also list for safety inspections and risk assessments (straight-line distance): Erith (3.0 miles), Bexleyheath (3.4 miles), Swanley (3.8 miles), Welling (4.7 miles), Northfleet (4.8 miles), Sidcup (5.0 miles).

What to think about for safety inspections and risk assessments in Dartford

  • Older shopfronts and listed buildings in Dartford may have narrow side screens and tight gaps that were thought acceptable when fitted. The report weighs what can reasonably be improved.
  • Doors on escape routes must let people out safely during a fire or evacuation. The inspection checks break-out, power-failure opening or manual release, as the fire strategy requires.
  • Power failure behaviour is easy to overlook. The inspection tests what the door does when the mains supply or battery fails, which matters most on escape routes.
  • Care homes and hospitals in Dartford have users who move slowly or unpredictably. The inspection pays close attention to sensor coverage and door speeds where frail or confused people pass through.
  • Shared entrances in office blocks and business parks in Dartford may serve several tenants. Agree who holds the report and who pays for upgrades before booking.

Safety inspections and risk assessments in Dartford: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.

ItemGuide priceNotes
Safety inspection and risk assessment, existing door£125 – £250per door, written report, ex VAT
Inspection added to a service visitreducedquoted with the service
Upgrades found by the inspectionquoted separatelysee safety and compliance upgrades

The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.

Standards and rules in England

No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.

BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.

How it works

  1. Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Dartford and how much the site depends on the door.
  2. Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
  3. Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
  4. Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.

If nobody can find the last risk assessment for the doors at your building in Dartford, get in touch. We will agree the fee up front and book a visit.

Safety inspections and risk assessments in Dartford: questions

Do we have to use you for the upgrades the inspection recommends in Dartford?

No. The report is yours, and any competent installer can carry out the work. If you want us to do it, each upgrade is quoted separately and itemised, so you can phase the work and start with the high-priority items.

How much should I budget for safety inspections and risk assessments in Dartford?

Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Dartford, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

How long will our door in Dartford be out of use during the inspection?

Usually only for short periods while sensors are tested and the door is observed in different modes. A single door generally takes about an hour in total. For busy entrances the inspection can be planned for a quieter time, or one leaf tested at a time where the door allows it.

What if a door in Dartford is found to be unsafe?

The engineer explains the problem before leaving and may recommend switching the door to a safer mode until it is fixed. High-priority findings are flagged at the top of the report. We can quote the repair or upgrade straight away, or you can arrange it with another competent installer.

Do you leave a written record after each visit in Dartford?

Yes. Every visit ends with a written record of what was checked, what was done and anything that still needs attention. For safety inspections you receive a report of the findings and a site-specific risk assessment. Keeping these on file is the usual way to show that a workplace door is maintained and in good working order.

Do you offer service contracts in Dartford?

Yes. A service contract sets out how many visits a year each door receives, what each visit includes and the price, all agreed in writing before you sign. Contracts suit sites with several doors or busy entrances, because visits are planned ahead and the records stay in one place. Contract length and notice terms are shown in the agreement.

Do businesses in Dartford have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Safety inspections and risk assessments in Dartford

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.