Covering Dartford and nearby
Coverage for automatic door repairs runs across the DA1 and DA2 postcode districts and out into the surrounding parts of Kent. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.
Council offices, libraries, leisure centres and other public buildings in Dartford usually buy through procurement rules. Itemised written prices, method statements and the paperwork a buyer needs can all be provided, and the work is carried out by specialist engineers working under our management.
Nearby towns we also list for automatic door repairs (straight-line distance): Erith (3.0 miles), Bexleyheath (3.4 miles), Swanley (3.8 miles), Welling (4.7 miles), Northfleet (4.8 miles), Sidcup (5.0 miles).
What to think about for automatic door repairs in Dartford
- Leisure centres, schools and public buildings in Dartford may need a contractor induction or permit before work starts. Send any site rules with your booking so the visit can go ahead first time.
- Older shopfronts in Dartford may have automatic doors with discontinued drive units. Ask whether parts are still available before agreeing to a large repair, as a new operator may be better value.
- A door with battery backup may show a fault, or fail to open in a power cut, when its battery is worn out. Batteries are a routine replacement part rather than a major repair.
- Busy high street shops in Dartford lose trade quickly when the entrance fails. Keep the programme switch key where staff can find it, so the door can be set to a safe mode while you wait.
- Glass damage needs prompt action to keep people safe. Switch the door off, keep people back from the broken leaf and tape or board the glass if that can be done safely.
Automatic door repairs in Dartford: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £95 ex VAT (£114 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Repair visit including the first hour, standard hours | £95 – £195 | ex VAT; homes £114 – £234 inc VAT |
| Repair visit, evenings and weekends | £195 – £300 | ex VAT; homes £234 – £360 inc VAT |
| Additional labour | £65 – £95 | per hour, ex VAT; homes £78 – £114 inc VAT |
| Sensor replacement | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Drive belt replacement | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Rollers, carriage wheels or floor guides | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Door off track or realignment | £125 – £345 | ex VAT; homes £150 – £414 inc VAT |
| Controller (control board) replacement | £395 – £895 | fitted, ex VAT; homes £474 – £1,074 inc VAT |
| Motor or gearbox replacement | £695 – £1,395 | fitted, ex VAT; homes £834 – £1,674 inc VAT |
The visit price is agreed in writing before an engineer attends. Parts and further work are quoted before they are done. Prices for faulty parts depend on the make and model of the door.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
How it works
- Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Dartford and how much the site depends on the door.
- Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
- Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
- Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.
Managing doors across several sites in and around Dartford? Send us the list of faults and we will price each visit in writing before booking engineers.
Automatic door repairs in Dartford: questions
Is it safe to keep using a faulty automatic door in Dartford?
It depends on the fault. A slow or noisy door may be safe to use until the visit, but a door that strikes people, closes unexpectedly or has damaged glass should be switched off and kept clear. If you are unsure, switch it off and use another entrance until an engineer has checked it.
Can you give me a price for automatic door repairs in Dartford?
Our guide starts from £95 excluding VAT (visit including the first hour), the same guide price we use across the UK. For homes that is from £114 including VAT. We agree the visit price in writing before an engineer attends in Dartford, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do you repair automatic doors in Dartford?
Yes. We take the booking, agree the price and manage the job, and the visit in Dartford is made by a specialist automatic door engineer working under our management. The engineers we send work on sliding, swing, folding and revolving doors from most makers, including doors we did not install. The visit price is confirmed with you in writing before the engineer is booked.
Can you tell me the cost before visiting my premises in Dartford?
We always confirm the visit price before attending. For some faults, photos of the door and the operator label let us price the repair itself in advance. Where the cause needs testing on site, parts and extra work are quoted after diagnosis and only go ahead if you agree.
Do you leave a written record after each visit in Dartford?
Yes. Every visit ends with a written record of what was checked, what was done and anything that still needs attention. For safety inspections you receive a report of the findings and a site-specific risk assessment. Keeping these on file is the usual way to show that a workplace door is maintained and in good working order.
Are parts quoted before they are fitted?
Always. If a repair or service in Dartford needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.
Do businesses in Dartford have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.