Covering Dartford and nearby
Engineers working under our management travel to addresses across the DA1 and DA2 postcode districts for automatic door servicing. There is no depot or showroom in Dartford; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Town-centre buildings in Dartford range from modern units to older shopfronts. Older frontages can have uneven floors, limited head height and timber frames that need checking before an operator is fitted or adjusted, and the engineer looks at these on site.
Nearby towns we also list for automatic door servicing (straight-line distance): Erith (3.0 miles), Bexleyheath (3.4 miles), Swanley (3.8 miles), Welling (4.7 miles), Northfleet (4.8 miles), Sidcup (5.0 miles).
What to think about for automatic door servicing in Dartford
- If several buildings share one maintenance budget, a single contract with one price per door and one set of records is easier to manage than booking visits separately.
- Care homes and hospitals in Dartford often need visits planned around mealtimes, medication rounds and visiting hours, so the door is not out of use at the busiest times.
- A logbook kept near the door, or a shared digital folder, makes it simple to show service history in Dartford when an insurer, landlord or inspector asks for it.
- Doors on escape routes need their break-out or power-failure opening tested at every service. Tell us which doors serve escape routes so the engineer checks the right functions.
- Older doors in Dartford may need parts replaced more often as they age. A service history that tracks wear helps you budget for repairs or a new drive unit before a breakdown.
Automatic door servicing in Dartford: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Single service visit, first door on site | £145 – £245 | checks, adjustment and service record, ex VAT; homes £174 – £294 inc VAT |
| Each additional door on the same visit | £60 – £120 | ex VAT; homes £72 – £144 inc VAT |
| Service contract, one visit a year | £145 – £245 | first door, per year, visit booked in advance at a fixed price, ex VAT; homes £174 – £294 inc VAT |
| Service contract, two visits a year | £270 – £460 | first door, per year, ex VAT; additional doors at the per-visit rate above; homes £324 – £552 inc VAT |
No law sets a fixed service interval. We recommend a safety check by a trained engineer at least once a year, and more frequent visits for busy doors. Repairs found during a service are quoted before they are done.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Dartford and how much the site depends on the door.
- Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
- Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
- Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.
Get in touch about automatic door servicing in Dartford. We will suggest an interval to suit how much each door is used and price the visits up front.
Automatic door servicing in Dartford: questions
How often should doors in Dartford be serviced?
There is no fixed legal interval. We recommend a trained engineer checks the safety functions at least once a year, with the interval set by the manufacturer's instructions and how heavily the door is used. Busy entrances, such as shops and surgeries, are often serviced every six months.
Is there a guide price for automatic door servicing in Dartford?
Our guide starts from £145 excluding VAT (per visit, first door), the same guide price we use across the UK. For homes that is from £174 including VAT. We agree the visit price in writing before an engineer attends in Dartford, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do you service revolving and folding doors in Dartford?
Yes, as well as sliding and swing doors. Revolving and folding doors have more moving parts and extra safety devices, so their services take longer and are priced accordingly. The checklist used for each door type is set out in its service report.
Do you service automatic doors in Dartford?
Yes. Planned service visits in Dartford are carried out by automatic door specialists who work under our management, with us as your contracting party. They service sliding, swing, folding and revolving doors from most makers. The cost of each visit is confirmed in writing before it is booked, and you receive a service report afterwards.
How often should automatic doors in Dartford be serviced?
No law sets a fixed interval. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Site staff should also carry out simple regular checks and keep a record of them.
What if a door in Dartford is found to be unsafe?
The engineer explains the problem and, where needed, leaves the door in a safe state, for example switched off or set so it cannot trap or strike anyone. You receive a written note of the issue. The repair or upgrade that would put it right is quoted before any further work is carried out.
Who is responsible for automatic doors on escape routes in Dartford?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.