Coverage across Fife
There is no branch to visit in Fife; instead, specialist engineers working under our management travel to you. That keeps revolving doors available across the whole area, including smaller towns and rural addresses. The page for each of the 9 towns we list below sets out nearby places, guide prices and the questions people usually ask.
Towns listed in Fife: Dunfermline, Kirkcaldy, Glenrothes, St Andrews, Rosyth, Cowdenbeath, Methil, Dalgety Bay, Cupar.
What to think about for revolving doors in Fife
- Busy reception areas in Fife may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
- Revolving doors with curved glass drum walls have longer lead times. Allow for them in any refurbishment programme across Fife, and confirm dates before booking floor layers or shopfitters.
- Listed buildings and conservation areas in Fife may need consent for a revolving door, especially if it projects or changes the façade. Drawings and finish samples help the planning authority.
- Automatic revolving doors need power to the canopy and links to the fire alarm and access control. Plan cable routes before ceilings are closed in.
- Plan the pass door first. Wheelchair users, pushchairs and deliveries need an accessible powered door beside the drum, and it should be easy to find from the street in Fife, with clear signs.
Revolving doors in Fife: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in Scotland
Building regulations guidance treats revolving doors as not accessible on their own, so an accessible powered swing or sliding door should be provided alongside. In Scotland, fire safety regulations say sliding or revolving doors must not be used for exits specifically intended as emergency exits, and Scottish guidance allows automatic and revolving doors on an escape route only where they fail safely to outward opening, or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for revolving doors and book a survey in Fife.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Get a guide figure from the price tool, then let us survey your building in Fife and fix the price in writing.
Revolving doors in Fife: questions
How long does a revolving door project in Fife take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
Can you give me a price for revolving doors in Fife?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Fife confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will a revolving door in Fife work with our fire alarm?
It can. An automatic revolving door can be linked to the fire alarm so it stops, slows or folds as the fire strategy requires, and the pass door can be set to open. Your alarm engineer usually makes the panel connection, and the quote shows who is responsible for each part.
Is the survey for a revolving door in Fife free?
Yes. For a new revolving door and pass door, the survey costs nothing and carries no obligation. We look at the space, structure, floor, traffic and fire strategy, then send drawings and a fixed, itemised written quote. Each item is listed separately, which makes it easy to compare with other quotes.
How are payments structured for work in Fife?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
What power supply is needed for revolving doors in Fife?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Is a building warrant needed for a new automatic entrance in Fife?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.