Covering Swansea and nearby
Homes, businesses and public buildings throughout the SA1, SA2, SA5 and SA7 postcode districts can arrange drive unit replacement with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Swansea for the job rather than working from premises in town.
City-centre entrances tend to be the busiest doors of all: shopping centres, stations, hospitals and office towers can see thousands of passes a day. In Swansea, that usually means heavy-duty operators, careful sensor set-up and servicing at intervals matched to the traffic.
Nearby towns we also list for drive unit replacement (straight-line distance): Gorseinon (5.4 miles), Neath (6.6 miles), Port Talbot (7.3 miles), Llanelli (10.3 miles), Ammanford (12.0 miles), Maesteg (12.3 miles).
What to think about for drive unit replacement in Swansea
- Check the power supply. A dedicated fused spur and isolator near the door is usually needed, and older installations sometimes need electrical work before the new operator goes in.
- Heavy glass leaves need an operator rated for their weight. The survey records the size and glass type of each leaf so the right drive unit is specified.
- Hospitals and care homes in Swansea may need an alternative entrance during the changeover. Plan signs and step-free access for wheelchair users before work starts.
- Doors linked to the fire alarm or access control in Swansea need those links rewired to the new controller. Let us know which systems connect to the door.
- Worn floor guides and rollers can shorten the life of a new operator. It is often worth replacing them during the same visit rather than coming back later.
Drive unit replacement in Swansea: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in Wales
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Swansea.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Keep the frame, replace the drive. Arrange a free survey in Swansea and receive a fixed quote covering the new operator, sensors and paperwork.
Drive unit replacement in Swansea: questions
What lead time should we expect in Swansea?
Once the quote is accepted, drive units are typically 2 to 4 weeks to arrive, depending on the length and weight rating needed. The changeover date is agreed with you as soon as the parts are confirmed, and it can be planned around your opening hours.
What is the guide price for drive unit replacement in Swansea?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Swansea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What if the frame of our door in Swansea is not worth keeping?
Then we will tell you. Damaged or corroded frames, glass that is not safety glass, or an opening that is too narrow for the people using it are all reasons to choose a new door instead. We can quote both options so you can compare them side by side.
Do you replace automatic door drive units in Swansea?
Yes. We are the contracting party for drive unit replacements in Swansea, and the survey and changeover are carried out by specialist engineers we manage. The survey is free and checks that the frame and leaves are worth keeping. You then receive a fixed, itemised quote for the new operator, sensors and any other parts the door needs.
What is the lead time for drive unit replacement in Swansea?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Can automatic doors be fitted to a listed building in Swansea?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Are the rules for automatic doors different in Wales?
Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.