Covering Swansea and nearby
Our coverage of Swansea takes in the SA1, SA2, SA5 and SA7 postcode districts and the neighbouring parts of West Glamorgan. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about automatic door servicing and we will confirm the arrangements and the price in writing.
Hospitals, universities and large public buildings in and around Swansea often have dozens of automatic doors on one estate, from main entrances to ward and corridor doors. Grouping surveys, servicing and inspections across a site keeps records in one place and visits efficient.
Nearby towns we also list for automatic door servicing (straight-line distance): Gorseinon (5.4 miles), Neath (6.6 miles), Port Talbot (7.3 miles), Llanelli (10.3 miles), Ammanford (12.0 miles), Maesteg (12.3 miles).
What to think about for automatic door servicing in Swansea
- Doors on escape routes need their break-out or power-failure opening tested at every service. Tell us which doors serve escape routes so the engineer checks the right functions.
- Care homes and hospitals in Swansea often need visits planned around mealtimes, medication rounds and visiting hours, so the door is not out of use at the busiest times.
- Exposed entrances collect grit, leaves and rain. Weather-facing doors benefit from extra attention to the floor guide, brush strips and sensor settings at each service.
- Business parks and retail parks in Swansea may have doors owned by the landlord and doors leased with the unit. Check who is responsible for servicing each door before booking.
- If several buildings share one maintenance budget, a single contract with one price per door and one set of records is easier to manage than booking visits separately.
Automatic door servicing in Swansea: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Single service visit, first door on site | £145 – £245 | checks, adjustment and service record, ex VAT; homes £174 – £294 inc VAT |
| Each additional door on the same visit | £60 – £120 | ex VAT; homes £72 – £144 inc VAT |
| Service contract, one visit a year | £145 – £245 | first door, per year, visit booked in advance at a fixed price, ex VAT; homes £174 – £294 inc VAT |
| Service contract, two visits a year | £270 – £460 | first door, per year, ex VAT; additional doors at the per-visit rate above; homes £324 – £552 inc VAT |
No law sets a fixed service interval. We recommend a safety check by a trained engineer at least once a year, and more frequent visits for busy doors. Repairs found during a service are quoted before they are done.
Standards and rules in Wales
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Explain the problem. Whether the door is stuck, slow, noisy or due its next check, a short description and a few photos tell us which kind of visit to book for automatic door servicing and what to bring.
- Visit cost agreed. You get the visit price in writing before we book the engineer. There are no hidden extras: parts and further work are always quoted separately and in advance.
- Engineer on site. The engineer inspects the operator, sensors, tracks and leaves, carries out the repair or service, and runs the door through its safety tests before it goes back into use.
- Follow-up quoted. You are sent a record of the visit. If something else needs attention, we quote it in writing; for doors on a service plan, the next visit date is noted on the record.
If your doors in Swansea have not been serviced for a while, start with a single visit. The report will show their condition and what, if anything, needs doing.
Automatic door servicing in Swansea: questions
Can one contract cover all our buildings in Swansea and nearby?
Yes. A contract can list every door across your sites, with the visits per year and the price for each door. One schedule and one set of service reports make it easier to keep records complete, and repair visits between services are charged at the contract rates.
How much should I budget for automatic door servicing in Swansea?
Our guide starts from £145 excluding VAT (per visit, first door), the same guide price we use across the UK. For homes that is from £174 including VAT. We agree the visit price in writing before an engineer attends in Swansea, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
What happens if the service in Swansea finds a fault?
The engineer explains what they found and deals with small issues as part of the visit. Worn parts or longer repairs are quoted to you first and only carried out once you agree. The service report records the fault so it can be tracked at later visits.
Do you service automatic doors in Swansea?
Yes. Planned service visits in Swansea are carried out by automatic door specialists who work under our management, with us as your contracting party. They service sliding, swing, folding and revolving doors from most makers. The cost of each visit is confirmed in writing before it is booked, and you receive a service report afterwards.
What happens during a visit in Swansea?
The engineer checks how the door is operating, diagnoses the fault or carries out the service, and tests the safety sensors and other functions before leaving. On a service visit that includes cleaning, adjustment and lubrication where needed. Anything that cannot be put right on the visit, or that needs parts, is explained and quoted before further work goes ahead.
How is the visit price set for work in Swansea?
We agree the visit price with you in writing before an engineer attends. It is based on the type of door, the work requested and the location. If parts or further work are needed once the engineer has found the cause, those are quoted before they are done, so the cost never moves without your agreement.
Are the rules for automatic doors different in Wales?
Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.