Covering Stratford-upon-Avon and nearby
From shops and surgeries to schools, care homes and private houses, any building in the CV37 postcode district can be covered for drive unit replacement. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Independent businesses in Stratford-upon-Avon often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.
Nearby towns we also list for drive unit replacement (straight-line distance): Warwick (8.2 miles), Leamington Spa (10.2 miles), Kenilworth (12.1 miles), Evesham (12.3 miles), Redditch (12.8 miles), Solihull (15.7 miles).
What to think about for drive unit replacement in Stratford-upon-Avon
- Battery backup is easier to add with a new drive unit. It lets the door open or close safely in a power cut, which matters most on escape routes.
- Listed buildings and conservation areas in Stratford-upon-Avon make it attractive to keep the existing frame. A new operator inside the existing header changes little that can be seen.
- Doors linked to the fire alarm or access control in Stratford-upon-Avon need those links rewired to the new controller. Let us know which systems connect to the door.
- Older shopfronts in Stratford-upon-Avon may have headers made for discontinued operators. Adapter plates usually allow a new drive unit to fit, which the survey confirms before you commit.
- Worn floor guides and rollers can shorten the life of a new operator. It is often worth replacing them during the same visit rather than coming back later.
Drive unit replacement in Stratford-upon-Avon: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Stratford-upon-Avon and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on drive unit replacement separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Get in touch about drive unit replacement in Stratford-upon-Avon. The door is surveyed free of charge and the changeover planned around your opening hours.
Drive unit replacement in Stratford-upon-Avon: questions
Do you replace automatic door drive units in Stratford-upon-Avon?
Yes. We are the contracting party for drive unit replacements in Stratford-upon-Avon, and the survey and changeover are carried out by specialist engineers we manage. The survey is free and checks that the frame and leaves are worth keeping. You then receive a fixed, itemised quote for the new operator, sensors and any other parts the door needs.
What is the guide price for drive unit replacement in Stratford-upon-Avon?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Stratford-upon-Avon confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long will our entrance in Stratford-upon-Avon be closed for the changeover?
A standard sliding door changeover typically takes a day, and a swing operator often less. The work can be scheduled early, after closing or at a weekend so it causes less disruption. Your quote shows the planned date and how long the entrance will be out of use.
Can you fit a new operator to a door another company installed in Stratford-upon-Avon?
Yes. We replace drive units on doors whoever fitted them. The survey identifies the existing header, leaves and track, and adapter plates usually let a new drive unit from one of the major European operator brands fit without changing the frame.
What does the written quote for drive unit replacement in Stratford-upon-Avon include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
Do you service doors in Stratford-upon-Avon after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Do businesses in Stratford-upon-Avon have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.