Covering Leamington Spa and nearby
We cover the whole of the CV31 and CV32 postcode districts, along with nearby towns in Warwickshire. You book each visit for drive unit replacement directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Around Leamington Spa there is usually a mix of retail parks, business parks and town-centre shops, each with different door needs. A retail park unit may need a wide bi-parting door for trolleys, while a town-centre shop often has a narrow frontage better suited to a single slider or a folding door.
Nearby towns we also list for drive unit replacement (straight-line distance): Warwick (2.7 miles), Kenilworth (5.2 miles), Coventry (8.4 miles), Stratford-upon-Avon (10.2 miles), Rugby (12.3 miles), Bedworth (13.6 miles).
What to think about for drive unit replacement in Leamington Spa
- Worn floor guides and rollers can shorten the life of a new operator. It is often worth replacing them during the same visit rather than coming back later.
- Doors linked to the fire alarm or access control in Leamington Spa need those links rewired to the new controller. Let us know which systems connect to the door.
- Ask for the paperwork. A converted door should come with its risk assessment, Declaration of Conformity and user instructions, which belong with your building and maintenance records.
- If the door is on an escape route, the new drive unit must be set up to open, break out or be openable by hand, as the building's fire strategy requires.
- Check the power supply. A dedicated fused spur and isolator near the door is usually needed, and older installations sometimes need electrical work before the new operator goes in.
Drive unit replacement in Leamington Spa: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for drive unit replacement in Leamington Spa, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Send the make and model from the operator cover of your door in Leamington Spa, and we will arrange a survey at no cost for a replacement drive unit.
Drive unit replacement in Leamington Spa: questions
Will you remove the old operator from our premises in Leamington Spa?
Yes. The old drive unit, sensors and any other replaced parts are taken away as part of the job, and the work area is left clean. Disposal is included in the fixed quote, so there is nothing extra to arrange or pay for afterwards.
What do you charge for drive unit replacement in Leamington Spa?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Leamington Spa confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you replace automatic door drive units in Leamington Spa?
Yes. We are the contracting party for drive unit replacements in Leamington Spa, and the survey and changeover are carried out by specialist engineers we manage. The survey is free and checks that the frame and leaves are worth keeping. You then receive a fixed, itemised quote for the new operator, sensors and any other parts the door needs.
Do you provide paperwork for the converted door in Leamington Spa?
Yes. When we fit a new drive unit we prepare the paperwork for the finished door, including the risk assessment, Declaration of Conformity and user instructions, and hand it over with the test results and settings. It belongs with your building records.
Do you service doors in Leamington Spa after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What power supply is needed for drive unit replacement in Leamington Spa?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Leamington Spa?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.