Covering Stratford-upon-Avon and nearby
Engineers working under our management travel to addresses across the CV37 postcode district for automatic door refurbishment. There is no depot or showroom in Stratford-upon-Avon; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Doors at quieter sites in Stratford-upon-Avon and elsewhere in Warwickshire can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for automatic door refurbishment (straight-line distance): Warwick (8.2 miles), Leamington Spa (10.2 miles), Kenilworth (12.1 miles), Evesham (12.3 miles), Redditch (12.8 miles), Solihull (15.7 miles).
What to think about for automatic door refurbishment in Stratford-upon-Avon
- Exposed entrances in Stratford-upon-Avon suffer most from worn seals and brush strips. New weatherproofing can cut draughts and noise noticeably, especially on doors facing the prevailing wind.
- Busy retail units in Stratford-upon-Avon may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
- Floors around the door in Stratford-upon-Avon may be worn or uneven. New floor guides and thresholds sometimes need small areas of making good, which the quote lists separately.
- Office blocks and business parks in Stratford-upon-Avon with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
- Older shopfronts with discontinued door systems may need equivalent parts rather than exact matches. The survey identifies what is still available before anything is ordered.
Automatic door refurbishment in Stratford-upon-Avon: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is automatic door refurbishment for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Stratford-upon-Avon.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Before replacing an automatic door in Stratford-upon-Avon, ask us to price refurbishment. The survey is free and shows exactly what is worth keeping.
Automatic door refurbishment in Stratford-upon-Avon: questions
Can you refinish the frame of our door in Stratford-upon-Avon?
Yes. Aluminium frames can be cleaned, repaired and recoated on site to refresh their colour. Badly damaged sections may need replacing rather than refinishing. Refinishing is listed separately in the quote, so you can decide whether to include it now or leave it for a later phase.
What is the guide price for automatic door refurbishment in Stratford-upon-Avon?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Stratford-upon-Avon confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can refurbishment in Stratford-upon-Avon help with draughts and heating costs?
New seals and brush strips, and leaves that close fully, reduce draughts through a closed door. For very exposed entrances, a second set of doors forming a draught lobby may also be worth considering, and we can price both so you can compare the likely benefit.
Will our entrance in Stratford-upon-Avon stay open during refurbishment?
Often, at least in part. Many jobs can be done one leaf at a time, and the work can be planned for quieter hours. If the entrance does need to close, the quote says for how long, so you can arrange another way in for staff and visitors.
How are payments structured for work in Stratford-upon-Avon?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
What do you need from us for parking and access in Stratford-upon-Avon?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Who is responsible for automatic doors on escape routes in Stratford-upon-Avon?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.