Covering Gateshead and nearby
Engineers working under our management travel to addresses across the NE8, NE9, NE10 and NE11 postcode districts for drive unit replacement. There is no depot or showroom in Gateshead; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Housing providers and managing agents in Gateshead look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.
Nearby towns we also list for drive unit replacement (straight-line distance): Newcastle upon Tyne (0.9 miles), Wallsend (3.4 miles), Hebburn (3.5 miles), Jarrow (4.8 miles), Washington (5.5 miles), North Shields (7.1 miles).
What to think about for drive unit replacement in Gateshead
- Busy retail entrances in Gateshead may prefer the changeover after closing time or on a quiet trading day. Tell us your hours when you book the survey.
- Check the power supply. A dedicated fused spur and isolator near the door is usually needed, and older installations sometimes need electrical work before the new operator goes in.
- Doors linked to the fire alarm or access control in Gateshead need those links rewired to the new controller. Let us know which systems connect to the door.
- Business parks and office blocks in Gateshead with several identical doors can replace operators in phases, keeping at least one entrance open at all times.
- Battery backup is easier to add with a new drive unit. It lets the door open or close safely in a power cut, which matters most on escape routes.
Drive unit replacement in Gateshead: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for drive unit replacement in Gateshead, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Keep the frame, replace the drive. Arrange a free survey in Gateshead and receive a fixed quote covering the new operator, sensors and paperwork.
Drive unit replacement in Gateshead: questions
Can you fit a new operator to a door another company installed in Gateshead?
Yes. We replace drive units on doors whoever fitted them. The survey identifies the existing header, leaves and track, and adapter plates usually let a new drive unit from one of the major European operator brands fit without changing the frame.
What price range should I expect for drive unit replacement in Gateshead?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Gateshead confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will you remove the old operator from our premises in Gateshead?
Yes. The old drive unit, sensors and any other replaced parts are taken away as part of the job, and the work area is left clean. Disposal is included in the fixed quote, so there is nothing extra to arrange or pay for afterwards.
Can the replacement in Gateshead include a service plan?
It can. After the changeover we recommend a service interval based on how heavily the door is used, and a service contract can be set up with a written record of each visit. Servicing is priced separately and agreed in writing before any visit takes place.
What does the written quote for drive unit replacement in Gateshead include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
Is there a warranty on drive unit replacement?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
Do businesses in Gateshead have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.