Coverage across South Yorkshire
Multi-site organisations in South Yorkshire, such as councils, housing providers, schools and health providers, can arrange drive unit replacement for every building through one contact. Each site gets its own written price and its own record. Smaller customers, from corner shops to private homes, follow exactly the same process. The towns we list here, 8 in all, appear below.
Towns listed in South Yorkshire: Sheffield, Rotherham, Doncaster, Barnsley, Chapeltown, Rawmarsh, Maltby, Thorne.
What to think about for drive unit replacement in South Yorkshire
- Check the power supply. A dedicated fused spur and isolator near the door is usually needed, and older installations sometimes need electrical work before the new operator goes in.
- Listed buildings and conservation areas in South Yorkshire make it attractive to keep the existing frame. A new operator inside the existing header changes little that can be seen.
- Heavy glass leaves need an operator rated for their weight. The survey records the size and glass type of each leaf so the right drive unit is specified.
- If the door is on an escape route, the new drive unit must be set up to open, break out or be openable by hand, as the building's fire strategy requires.
- Hospitals and care homes in South Yorkshire may need an alternative entrance during the changeover. Plan signs and step-free access for wheelchair users before work starts.
Drive unit replacement in South Yorkshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in South Yorkshire.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Get in touch about drive unit replacement in South Yorkshire. The door is surveyed free of charge and the changeover planned around your opening hours.
Drive unit replacement in South Yorkshire: questions
What lead time should we expect in South Yorkshire?
Once the quote is accepted, drive units are typically 2 to 4 weeks to arrive, depending on the length and weight rating needed. The changeover date is agreed with you as soon as the parts are confirmed, and it can be planned around your opening hours.
Can you give me a price for drive unit replacement in South Yorkshire?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in South Yorkshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you provide paperwork for the converted door in South Yorkshire?
Yes. When we fit a new drive unit we prepare the paperwork for the finished door, including the risk assessment, Declaration of Conformity and user instructions, and hand it over with the test results and settings. It belongs with your building records.
Do you replace automatic door drive units in South Yorkshire?
Yes. We are the contracting party for drive unit replacements in South Yorkshire, and the survey and changeover are carried out by specialist engineers we manage. The survey is free and checks that the frame and leaves are worth keeping. You then receive a fixed, itemised quote for the new operator, sensors and any other parts the door needs.
How do you make sure the door works for disabled visitors in South Yorkshire?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Do I need permission from a landlord or the council before work in South Yorkshire?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Do businesses in South Yorkshire have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.