UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Drive unit replacement · Greater Manchester

Drive unit replacement in Hazel Grove

Swing door operators wear out too. For corridors, washrooms and entrances in Hazel Grove, we can fit a new operator to the existing door and frame, set it up for the people using it and add a push pad or sensors as needed.

Town
Hazel Grove
Area
Greater Manchester
Postcodes
SK7
Guide price
Typically £1,995 to £3,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Hazel Grove and nearby

Homes, businesses and public buildings throughout the SK7 postcode district can arrange drive unit replacement with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Hazel Grove for the job rather than working from premises in town.

Small offices, community centres and village halls around Hazel Grove tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.

Nearby towns we also list for drive unit replacement (straight-line distance): Bredbury (2.3 miles), Stockport (2.5 miles), Bramhall (2.7 miles), Cheadle Hulme (3.1 miles), Hyde (4.9 miles), New Mills (5.0 miles).

What to think about for drive unit replacement in Hazel Grove

  • Hospitals and care homes in Hazel Grove may need an alternative entrance during the changeover. Plan signs and step-free access for wheelchair users before work starts.
  • Battery backup is easier to add with a new drive unit. It lets the door open or close safely in a power cut, which matters most on escape routes.
  • Listed buildings and conservation areas in Hazel Grove make it attractive to keep the existing frame. A new operator inside the existing header changes little that can be seen.
  • Older shopfronts in Hazel Grove may have headers made for discontinued operators. Adapter plates usually allow a new drive unit to fit, which the survey confirms before you commit.
  • Busy retail entrances in Hazel Grove may prefer the changeover after closing time or on a quiet trading day. Tell us your hours when you book the survey.

Drive unit replacement in Hazel Grove: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.

ItemGuide priceNotes
New drive unit on an existing automatic sliding door£1,995 – £3,995existing leaves kept, installed, ex VAT
New operator on an existing automatic swing door£1,795 – £3,995installed, ex VAT
Sensors replaced at the same time£195 – £495per sensor, ex VAT

Standards and rules in England

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
  2. Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
  3. Quote in writing. You receive a fixed, itemised quote for drive unit replacement in Hazel Grove, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
  4. Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.

Get in touch about drive unit replacement in Hazel Grove. The door is surveyed free of charge and the changeover planned around your opening hours.

Drive unit replacement in Hazel Grove: questions

Can the replacement in Hazel Grove include a service plan?

It can. After the changeover we recommend a service interval based on how heavily the door is used, and a service contract can be set up with a written record of each visit. Servicing is priced separately and agreed in writing before any visit takes place.

What will drive unit replacement in Hazel Grove cost?

Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Hazel Grove confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Will you remove the old operator from our premises in Hazel Grove?

Yes. The old drive unit, sensors and any other replaced parts are taken away as part of the job, and the work area is left clean. Disposal is included in the fixed quote, so there is nothing extra to arrange or pay for afterwards.

Can you fit a new operator to a door another company installed in Hazel Grove?

Yes. We replace drive units on doors whoever fitted them. The survey identifies the existing header, leaves and track, and adapter plates usually let a new drive unit from one of the major European operator brands fit without changing the frame.

What happens once the installation in Hazel Grove is finished?

The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.

What do you need from us for parking and access in Hazel Grove?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

Which building regulations apply to a new automatic entrance in Hazel Grove?

In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.

Next step

Drive unit replacement in Hazel Grove

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.