Coverage across Gwynedd
We treat Gwynedd as one service area for hermetic sliding doors, so a site on the edge of the area gets the same written pricing and the same standard of work as one in the busiest town centre. Specialist automatic door engineers working under our management carry out each visit. Choose from the 3 towns below, or contact us with any address.
Towns listed in Gwynedd: Bangor, Holyhead, Caernarfon.
What to think about for hermetic sliding doors in Gwynedd
- Theatre doors in Gwynedd can usually only be replaced during a planned shutdown. Agree the dates with the theatre team early, as the door is made to order and the room needs cleaning and validation after installation.
- Labs and cleanrooms in Gwynedd often have modular wall panels. Frame details must match the panel system, so involve the cleanroom contractor before the door is ordered.
- Choose finishes that stand up to the cleaning regime at your site in Gwynedd. Stainless steel and high-pressure laminate cope with strong disinfectants, but check the chemicals your cleaning team uses first.
- Power, building management and fire alarm links need planning with your electrical contractor. Cable routes into sealed cleanroom ceilings must be agreed early, before the panels are sealed.
- Touch-free activation should suit how staff work. Foot switches suit scrubbed theatre staff, wave sensors suit corridors, and card readers suit restricted labs where only trained staff may enter.
Hermetic sliding doors in Gwynedd: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £8,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Hermetic sliding door for a theatre, lab or cleanroom | from £8,995 | installed, ex VAT; typically up to £19,995 |
| Lead-lined, vision-panel or interlocked versions | Priced on survey | specified with your clinical or engineering team |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
Hermetic doors are specified with your clinical or engineering team; finishes, seals, vision panels, lead lining and interlocks change the price.
Standards and rules in Wales
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Glass in and beside doors must be safety glass or protected where people could walk into it, and clear glass needs markings so people can see it (Approved Document K, as published by the Welsh Government).
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for hermetic sliding doors and book a survey in Gwynedd.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Planning a theatre, lab or cleanroom project in Gwynedd? Contact us early so the hermetic doors are designed, made and fitted within your shutdown.
Hermetic sliding doors in Gwynedd: questions
Will the hermetic door in Gwynedd link to our building management system?
It can. The operator can send door status to the building management system and receive signals from it, as well as from the fire alarm and access control. The interface is agreed with your controls contractor and shown in the quote, so responsibilities are clear.
What price range should I expect for hermetic sliding doors in Gwynedd?
Our guide starts from £8,995 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Gwynedd confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you supply lead-lined hermetic doors in Gwynedd?
Yes. Lead-lined leaves and frames are made to the lead equivalence your radiation protection adviser specifies, with the same seals, finishes and touch-free activation as other hermetic doors. The extra weight is allowed for in the operator and the fixings.
How long will the room in Gwynedd be out of use?
Installing a single hermetic door usually takes one to two days on site, plus time for your own cleaning and validation afterwards. Larger doors, lead-lined doors or interlocked pairs take longer. The door is typically 6 to 10 weeks from order, so we agree dates with you well in advance.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Gwynedd is agreed before work starts.
Can automatic doors be fitted to a listed building in Gwynedd?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Gwynedd?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.