Coverage across Gwynedd
Here is how coverage works in Gwynedd. You contact us with the address and what the door needs, we confirm the price in writing, and a specialist engineer working under our management attends on an agreed date. That applies to curved automatic doors at a single shop door or across a whole estate of buildings, in any of the towns below or between them.
Towns listed in Gwynedd: Bangor, Holyhead, Caernarfon.
What to think about for curved automatic doors in Gwynedd
- Curved entrances in Gwynedd are often installed during a wider refurbishment. Working with the main contractor on dates, power and protection of the finished floor helps the door go in once, without return visits.
- A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across Gwynedd, think about how rainwater will leave the canopy without running down the glass into the threshold.
- The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
- Curved doors on landmark buildings in Gwynedd are often lit at night. Plan canopy lighting, signage and any warm air curtain alongside the door, so cables and fixings are in place before the glass goes in.
- A half-round door often projects beyond the existing building line. In town centres around Gwynedd, check early whether that affects the pavement, the highway boundary or the need for planning permission.
Curved automatic doors in Gwynedd: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in Wales
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for curved automatic doors and book a survey in Gwynedd.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Planning a landmark entrance in Gwynedd? Contact us early, so the survey, drawings and curved glass all fit your programme.
Curved automatic doors in Gwynedd: questions
Can you work with our architect or main contractor in Gwynedd?
Yes. Many curved doors are part of a larger refurbishment or new build. We can work from the architect's setting-out drawings, agree the structural opening, canopy and floor details with the contractor, and fit the door at the right stage of the programme so finished floors and glazing are protected.
How much should I budget for curved automatic doors in Gwynedd?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Gwynedd confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does a curved door project in Gwynedd take?
Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.
Is the site survey for a curved door in Gwynedd free?
Yes. For a new curved entrance, the survey costs nothing and carries no obligation. The engineer measures the frontage, checks the structure, floor and power, and discusses the options with you. You then receive drawings and a fixed, itemised written quote.
Can installation in Gwynedd happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
Can automatic doors be fitted to a listed building in Gwynedd?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Are the rules for automatic doors different in Wales?
Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.