UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · West Midlands

Fire door hold-open devices in Coventry

Hold-open devices let fire doors stay open in normal use and close as soon as the alarm sounds. For buildings in Coventry we supply and fit wired magnets, free-swing closers and radio or acoustic units, working with your alarm engineer where a panel connection is needed.

Town
Coventry
Area
West Midlands
Postcodes
CV1, CV2, CV3, CV4, CV5, CV6
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Coventry and nearby

Engineers working under our management travel to addresses across the CV1, CV2, CV3, CV4, CV5 and CV6 postcode districts for fire door hold-open devices. There is no depot or showroom in Coventry; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.

Shopping centre and transport entrances in Coventry are often on escape routes, so doors there are usually break-out or fail-safe types set up to match the fire strategy for the building. Any work on them is planned with the building's management so the route stays usable.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Kenilworth (4.9 miles), Bedworth (5.3 miles), Nuneaton (8.3 miles), Leamington Spa (8.4 miles), Warwick (9.0 miles), Rugby (10.7 miles).

What to think about for fire door hold-open devices in Coventry

  • Hard-wired magnets need a power supply near each door. In buildings in Coventry where that is awkward, battery units avoid running new cables along finished corridors.
  • Care homes in Coventry usually want bedroom doors that residents can open easily. Free-swing closers suit this, provided the evacuation strategy for the home supports them.
  • Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
  • Busy office corridors suit wall magnets that hold doors right back against the wall, out of the way of people and trolleys, until the alarm releases them.
  • Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.

Fire door hold-open devices in Coventry: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in England

Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Coventry and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on fire door hold-open devices separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Send us a list of the doors you want held open at your building in Coventry, plus any notes from your fire risk assessment, and we will arrange a survey at no cost.

Fire door hold-open devices in Coventry: questions

Can you work with the fire alarm company that maintains our system in Coventry?

Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.

What price range should I expect for fire door hold-open devices in Coventry?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Coventry confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Which doors in my building in Coventry can be held open?

That is decided by the fire risk assessment for the building, not by the installer. Many corridor, lounge and office doors can be held open on a device that releases on the alarm, while some stair and escape route doors cannot. If the assessment is unclear, check with your assessor before we finalise the quote.

Are battery hold-open units a good choice for older buildings in Coventry?

Often they are. Radio and acoustic battery units avoid long cable runs, which helps in older or listed buildings and finished corridors. Acoustic units are only suitable where the fire risk assessment allows them and the alarm can be heard clearly at the door. Batteries need replacing at the interval the maker states.

What power supply is needed for fire door hold-open devices in Coventry?

Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.

Can installation in Coventry happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

Who is responsible for automatic doors on escape routes in Coventry?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Fire door hold-open devices in Coventry

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.