Covering Kenilworth and nearby
If your building is in Kenilworth, or anywhere in the CV8 postcode district, we can arrange fire door hold-open devices. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Many buildings in Kenilworth are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Warwick (4.6 miles), Coventry (4.9 miles), Leamington Spa (5.2 miles), Solihull (9.5 miles), Bedworth (10.2 miles), Shirley (10.8 miles).
What to think about for fire door hold-open devices in Kenilworth
- Residential blocks often have communal corridor doors that residents prop open. Hold-open devices give the same convenience while letting the doors close when the alarm sounds.
- Busy office corridors suit wall magnets that hold doors right back against the wall, out of the way of people and trolleys, until the alarm releases them.
- Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
- Hard-wired magnets need a power supply near each door. In buildings in Kenilworth where that is awkward, battery units avoid running new cables along finished corridors.
- Think about who tests the fire alarm each week at your building in Kenilworth. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
Fire door hold-open devices in Kenilworth: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Kenilworth.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
For care homes, offices and schools in Kenilworth, we survey, quote and fit alarm-linked hold-open devices. Get in touch to arrange a time that suits your building.
Fire door hold-open devices in Kenilworth: questions
Which doors in my building in Kenilworth can be held open?
That is decided by the fire risk assessment for the building, not by the installer. Many corridor, lounge and office doors can be held open on a device that releases on the alarm, while some stair and escape route doors cannot. If the assessment is unclear, check with your assessor before we finalise the quote.
What do you charge for fire door hold-open devices in Kenilworth?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Kenilworth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit fire door hold-open devices in Kenilworth?
Yes. We arrange surveys and installations in Kenilworth through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.
Can you work with the fire alarm company that maintains our system in Kenilworth?
Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.
What is the lead time for fire door hold-open devices in Kenilworth?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
What happens once the installation in Kenilworth is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Kenilworth?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.