UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Perth and Kinross

Fire door hold-open devices in Perth

Hold-open devices let fire doors stay open in normal use and close as soon as the alarm sounds. For buildings in Perth we supply and fit wired magnets, free-swing closers and radio or acoustic units, working with your alarm engineer where a panel connection is needed.

Town
Perth
Area
Perth and Kinross
Postcodes
PH1, PH2
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Perth and nearby

Coverage for fire door hold-open devices runs across the PH1 and PH2 postcode districts and out into the surrounding parts of Perth and Kinross. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.

Independent businesses in Perth often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Blairgowrie (14.0 miles), Crieff (15.7 miles), Cupar (16.9 miles), Glenrothes (17.0 miles), Dundee (18.2 miles), Cowdenbeath (19.9 miles).

What to think about for fire door hold-open devices in Perth

  • Think about who tests the fire alarm each week at your building in Perth. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
  • Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.
  • Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
  • Older buildings in Perth may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
  • Schools and colleges in Perth may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.

Fire door hold-open devices in Perth: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in Scotland

Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the person responsible for fire safety under the Fire (Scotland) Act 2005.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Perth.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Arrange your free hold-open device survey in Perth today and receive a written quote with a fixed price. Nothing is fitted until you have accepted it.

Fire door hold-open devices in Perth: questions

Will you test the hold-open devices before leaving our site in Perth?

Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.

What do you charge for fire door hold-open devices in Perth?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Perth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

What will the survey in Perth look at?

The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.

Do care homes in Perth use free-swing closers?

Many do. A free-swing closer lets residents open their bedroom door without pushing against a closer, and it still shuts the door when the fire alarm operates. Whether it suits each room depends on the home's fire risk assessment and evacuation strategy, which we read before recommending any device.

What is the lead time for fire door hold-open devices in Perth?

Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.

What do you need from us for parking and access in Perth?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

Do businesses in Perth have to fit automatic doors?

No law requires automatic doors everywhere. Under the Equality Act 2010 service providers and employers must make reasonable adjustments for disabled people, and Scottish guidance says powered doors improve accessibility at entrances. An automatic door is often the practical answer.

Next step

Fire door hold-open devices in Perth

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.