UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Perth and Kinross

Fire door hold-open devices in Blairgowrie

Specialist engineers working under our management fit hold-open devices for property managers, care providers and businesses in Blairgowrie. They look at the door, the closer and the fire alarm first, and the fixed price includes any repair needed to make a door close properly.

Town
Blairgowrie
Area
Perth and Kinross
Postcodes
PH10
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Blairgowrie and nearby

Our coverage of Blairgowrie takes in the PH10 postcode district and the neighbouring parts of Perth and Kinross. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about fire door hold-open devices and we will confirm the arrangements and the price in writing.

Small offices, community centres and village halls around Blairgowrie tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Perth (14.0 miles), Dundee (16.3 miles), Forfar (17.5 miles), Cupar (22.6 miles), Crieff (24.3 miles), Carnoustie (25.0 miles).

What to think about for fire door hold-open devices in Blairgowrie

  • Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
  • Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.
  • Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.
  • If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
  • Think about who tests the fire alarm each week at your building in Blairgowrie. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.

Fire door hold-open devices in Blairgowrie: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in Scotland

Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
  2. Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
  3. Quote in writing. You receive a fixed, itemised quote for fire door hold-open devices in Blairgowrie, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
  4. Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.

Arrange your free hold-open device survey in Blairgowrie today and receive a written quote with a fixed price. Nothing is fitted until you have accepted it.

Fire door hold-open devices in Blairgowrie: questions

Do you fit fire door hold-open devices in Blairgowrie?

Yes. We arrange surveys and installations in Blairgowrie through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.

What do you charge for fire door hold-open devices in Blairgowrie?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Blairgowrie confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Will you test the hold-open devices before leaving our site in Blairgowrie?

Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.

What will the survey in Blairgowrie look at?

The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.

What power supply is needed for fire door hold-open devices in Blairgowrie?

Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.

Can installation in Blairgowrie happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

Is a building warrant needed for a new automatic entrance in Blairgowrie?

Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.

Next step

Fire door hold-open devices in Blairgowrie

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.