UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Leicestershire

Fire door hold-open devices in Loughborough

Specialist engineers working under our management fit hold-open devices for property managers, care providers and businesses in Loughborough. They look at the door, the closer and the fire alarm first, and the fixed price includes any repair needed to make a door close properly.

Town
Loughborough
Area
Leicestershire
Postcodes
LE11
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Loughborough and nearby

From shops and surgeries to schools, care homes and private houses, any building in the LE11 postcode district can be covered for fire door hold-open devices. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.

Housing providers and managing agents in Loughborough look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Coalville (7.7 miles), Leicester (9.3 miles), Long Eaton (9.6 miles), Beeston (10.4 miles), West Bridgford (11.7 miles), Oadby (12.1 miles).

What to think about for fire door hold-open devices in Loughborough

  • Hard-wired magnets need a power supply near each door. In buildings in Loughborough where that is awkward, battery units avoid running new cables along finished corridors.
  • Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
  • Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
  • Older buildings in Loughborough may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
  • Schools and colleges in Loughborough may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.

Fire door hold-open devices in Loughborough: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Loughborough and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on fire door hold-open devices separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Send us a list of the doors you want held open at your building in Loughborough, plus any notes from your fire risk assessment, and we will arrange a survey at no cost.

Fire door hold-open devices in Loughborough: questions

Do care homes in Loughborough use free-swing closers?

Many do. A free-swing closer lets residents open their bedroom door without pushing against a closer, and it still shuts the door when the fire alarm operates. Whether it suits each room depends on the home's fire risk assessment and evacuation strategy, which we read before recommending any device.

What price range should I expect for fire door hold-open devices in Loughborough?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Loughborough confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Are battery hold-open units a good choice for older buildings in Loughborough?

Often they are. Radio and acoustic battery units avoid long cable runs, which helps in older or listed buildings and finished corridors. Acoustic units are only suitable where the fire risk assessment allows them and the alarm can be heard clearly at the door. Batteries need replacing at the interval the maker states.

Will you test the hold-open devices before leaving our site in Loughborough?

Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.

What should I send before the survey in Loughborough?

A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for fire door hold-open devices together more easily.

What do you need from us for parking and access in Loughborough?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

Who is responsible for automatic doors on escape routes in Loughborough?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Fire door hold-open devices in Loughborough

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.